Que signifie votre code Code Défaut BMW ?
Grace au système OBD, les
Bmw
fabriqués après 1996 sont normalement équipés d'une prise diagnostique OBD.
Si l'ordinateur de la voiture rencontre un problème,un code d'erreur ou un code de diagnostic (DTC)
sera stocké dans la mémoire de l'ECU de la voiture.
Avec un lecteur OBD branché sur le port OBD (On-Board Diagnostics) de la voiture, vous pouvez lire la liste des codes stockés, et donc découvrir quel est le problème.
Les codes suivent une formule permettant de savoir généralement quel est le problème avant même de regarder le tableau ci-dessous.
Nous vous présentons ci-dessus une liste très complète des différents codes défauts possibles.
Si le code défaut de votre auto s'affiche au tableau de bord, vous n'aurez peut-être même pas besoin d'un lecteur OBD . il sera dans la liste .
Réparer le code défaut de votre auto, c'est potentiellement simple à faire avec vos revues et méthodes techniques.
Réparer le code défaut de votre auto, c’est potentiellement simple à faire avec nos revues et méthodes techniques
| Code | Libellé |
|---|---|
| CD9485 | Message (request, torque, crankshaft, transmission, 0xB0) out of date, receiver: DME/DDE (PT-CAN2), transmitter: EGS (PT-CAN2) |
| CD9486 | EGS interface (request torque crankshaft gearbox, 0xB0): Signal invalid |
| CD9487 | No message (request, torque, crankshaft, transmission, 0xB0), receiver: DME/DDE (PT-CAN2), transmitter: EGS (PT-CAN2) |
| CD9488 | Interface DSC (SOLL_MOM_ANF, 0xBB): Signal invalid |
| CD948A | Message (TORQUE_ANF_DSC, 0xB6) checksum error, receiver: DME/DDE, transmitter: ABS |
| CD948B | Message (TORQUE_ANF_DSC, 0xB6) out of date, receiver: DME/DDE, transmitter: ABS |
| CD948C | Interface DSC(DREHMOMENT_ANF_DSC, 0xB6): Signal invalid |
| CD948D | Missing message (TORQUE_ANF_DSC, 0xB6), receiver: DME/DDE, transmitter: ABS |
| CD948E | Message (request, torque, crankshaft, transmission, 0xB0) checksum incorrect, receiver: DME/DDE (PT-CAN), transmitter: EGS (PT-CAN) |
| CD948F | Message (request, torque, crankshaft, transmission, 0xB0) out of date, receiver: DME/DDE (PT-CAN), transmitter: EGS (PT-CAN) |
| CD9491 | No message (request, torque, crankshaft, transmission, 0xB0), receiver: DME/DDE (PT-CAN), transmitter: EGS (PT-CAN) |
| CD9494 | Integrated chassis management (ICM) interface(ANF_RADMOM_PT, 0xBF): Signal invalid |
| CD9496 | Message (request continuous engine torque sum FAS, 33.1.4) checksum error, receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD9497 | Message (request, wheel torque, drivetrain, sum FAS, 33.1.4) out of date, receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD9498 | ICM interface (request wheel torque, drive train, sum FAS, 33.1.4): Signal invalid |
| CD9499 | No message (request, wheel torque, drivetrain, sum FAS, 33.1.4), receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD94A0 | Integrated chassis management (ICM) interface (SPEED, 0x1A0): Signal invalid |
| CD94A2 | No message (SPEED, 0x1A0), receiver: DME/DDE, transmitter: integrated chassis management (ICM) |
| CD94A5 | Message (request, wheel torque, drivetrain, sum, stabilization, 43.1.4) checksum incorrect, receiver: DME/DDE (FlexRay), transmitter: ABS (FlexRay) |
| CD94A6 | Message (request, wheel torque, drivetrain, sum, stabilization, 43.1.4) out of date, receiver: DME/DDE (FlexRay), transmitter: ABS (FlexRay) |
| CD94A7 | DSC interface (request for wheel torque drive train sum stabilisation, 43.1.4): Signal invalid |
| CD94A8 | No message (request, wheel torque, drivetrain, sum, stabilization, 43.1.4), receiver: DME/DDE (FlexRay), transmitter: ABS (FlexRay) |
| CD94A9 | Interface DSC (SPEED_WHEEL, 0xCE): Signal invalid |
| CD94AA | Missing message (SPEED_WHEEL, 0xCE), receiver: DME/DDE, transmitter: ABS |
| CD94AB | Interface car access system (CAS)(ZV and lid status, 0x2FC): Signal invalid |
| CD94AC | No message (central locking system and lid status, 0x2FC), receiver: DME/DDE, transmitter: Car access system (CAS) |
| CD94AD | Message (longitudinal acceleration, centre of gravity, 55.0.2) checksum incorrect, receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD94AE | Message (longitudinal acceleration, centre of gravity, 55.0.2) out of date, receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD94AF | Integrated chassis management (ICM) interface (longitudinal acceleration, centre of gravity): Signal invalid |
| CD94B0 | No message (longitudinal acceleration, centre of gravity, 55.0.2), receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD94B1 | Message (longitudinal acceleration centre of gravity/lateral acceleration centre of gravity, 55.0.2) incorrect checksum, receiver DME/DDE, transmitter ICM |
| CD94B2 | Message (longitudinal acceleration centre of gravity/lateral acceleration centre of gravity, 55.0.2) not up to date, receiver DME/DDE, transmitter ICM |
| CD94B3 | Invalid message (longitudinal acceleration centre of gravity/lateral acceleration centre of gravity, 55.0.2) receiver DDE, transmitter DSC / ICM |
| CD94B4 | Message (longitudinal acceleration centre of gravity/lateral acceleration centre of gravity, 55.0.2) missing, receiver DME/DDE, transmitter ICM |
| CD94B5 | Message (configuration, switch, driving dynamics, 272.4.8) out of date, receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD94B6 | ICM interface (configuration, driving dynamics switch, 272.4.8): Signal invalid |
| CD94B7 | No message (configuration, switch, driving dynamics, 272.4.8), receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD94B8 | Message (display, speed, engine, dynamization, 0xF8) out of date, receiver: DME/DDE (PT-CAN2), transmitter: EGS (PT-CAN2) |
| CD94B9 | Interface EGS (display of engine speed, dynamic, 0xF8): Signal invalid |
| CD94BA | No message (display, speed, engine, dynamization, 0xF8), receiver: DME/DDE (PT-CAN2), transmitter: EGS (PT-CAN2) |
| CD94BB | Interface DSC (actual speed, wheel): Signal invalid |
| CD94BC | Message (SERVICES-ID2=68 elektrical consumer request, 0x580-0x5FF): Message from multiple control units (DSC, ICM, ...) failed |
| CD94BD | Message (configuration, switch, driving dynamics, 272.4.8) checksum incorrect, receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD94C0 | No message (OBDSensDiag, 0xXX), receiver: DME/DDE, transmitter: instrument cluster |
| CD94C1 | Message (vehicle speed centre of gravity, 55.3.4) faulty, receiver: DME/DDE, transmitter: integrated chassis management (ICM) |
| CD94C2 | EGS interface (diagnosis OBD gearbox, 0x396): Signal invalid |
| CD94C3 | No message (diagnosis OBD transmission, 0x396), receiver: DME/DDE (PT-CAN), transmitter: EGS (PT-CAN) |
| CD94C4 | ICM interface (display LDM 1, 135.0.2): Signal invalid |
| CD94C5 | No message (display LDM 1, 135.0.2), receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD94C6 | AL interface (power request, electrical EPS, 234.0.2): Signal invalid |
| CD94C7 | No message (request, power, electric EPS, 234.0.2), receiver: DME/DDE (FlexRay), transmitter: AL (FlexRay) |
| CD94CC | PMA interface (parking assistant, 231.1.2): Signal invalid |
| CD94CD | No message (park assist, 231.1.2), receiver: DME/DDE (FlexRay), transmitter: PMA (FlexRay) |
| CD94CE | Interface DSC (vehicle stationary): Signal invalid |
| CD94CF | No message (vehicle stationary, 263.1.4), receiver: DME/DDE (FlexRay), transmitter: ABS (FlexRay) |
| CD94D0 | Message (vehicle stationary, 263.1.4) checksum incorrect, receiver: DME/DDE (FlexRay), transmitter: ABS (FlexRay) |
| CD94D2 | Message (vehicle stationary, parking brake, 0x2DC) checksum incorrect, receiver: DME/DDE (PT-CAN), transmitter: EMF (PT-CAN) |
| CD94D3 | Message (vehicle stationary, parking brake, 0x2DC) out of date, receiver: DME/DDE (PT-CAN), transmitter: EMF (PT-CAN) |
| CD94D4 | EMF interface (vehicle standstill parking brake, 0x2DC): Signal invalid |
| CD94D5 | No message (vehicle stationary, parking brake, 0x2DC), receiver: DME/DDE (PT-CAN), transmitter: EMF (PT-CAN) |
| CD94D9 | Message (electrical request consumer, 0x580) faulty, receiver: DME/DDE (PT-CAN) |
| CD94DA | No message (electrical request, consumer, 0x580), receiver: DME/DDE (PT-CAN) |
| CD94DB | Interface car access system (CAS) (vehicle identification number): Signal invalid |
| CD94DC | EGS, PT-CAN/PT-CAN2: Communication fault |
| CD94DE | Message (OBD sensor diagnose status, 0x580) absent, receiver: DME/DDE (PT-CAN), transmitter: Multiple |
| CD94E1 | Message (requirement stage electric fan ID2=21, 0x580) faulty, receiver: DME/DDE (PT-CAN), transmitter: Multiple |
| CD94E2 | Message (requirement stage electric fan ID2=21, 0x580) absent, receiver: DME/DDE (PT-CAN), transmitter: Multiple |
| CD94E3 | Message (requirement MSA Funktion ID2=19, 0x580) faulty, receiver: DME/DDE (PT-CAN), transmitter: Multiple |
| CD94E4 | Message (requirement MSA Funktion ID2=19, 0x580) absent, receiver: DME/DDE (PT-CAN), transmitter: Multiple |
| CD94E7 | Message (actual steering angle, front axle, 57.1.2) checksum incorrect, receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD94E8 | Message (actual steering angle, front axle, 57.1.2) out of date, receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD94E9 | Integrated chassis management (ICM) interface (actual steering angle, front axle): Signal invalid |
| CD94EA | No message (actual steering angle, front axle, 57.1.2), receiver: DME/DDE (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| CD94ED | No message (data, display, transmission train, 0x3FD), receiver: DME/DDE (PT-CAN), transmitter: EGS (PT-CAN) |
| CD94EE | DSC interface (wheel speed, front left, 46.1.2): Signal invalid |
| CD94EF | DSC interface (wheel speed, front right, 46.1.2): Signal invalid |
| CD94F0 | DSC interface (wheel speed, rear left, 46.1.2): Signal invalid |
| CD94F1 | DSC interface (wheel speed, rear right, 46.1.2): Signal invalid |
| CD94F7 | NOx sensor after NOx catalytic converter, plausibility: Incorrect sensor installed |
| CD94F8 | NOx sensor before NOx catalytic converter, plausibility: Incorrect sensor installed |
| CD94FC | Message (status, seat belt contact, seat occupancy, 0x297) checksum error, receiver: DME/DDE, transmitter: Airbag |
| CD94FD | Message (status, seat belt contact, seat occupancy, 0x297) out of date, receiver: DME/DDE, transmitter: Airbag |
| CD94FF | NOx sensor after DeNOx catalytic converter, plausibility: Reference line correction factor in the sensor (slope or offset) outside valid range |
| CD9500 | NOx sensor before DeNOx catalytic converter, plausibility: Reference line correction factor in the sensor (slope or offset) outside valid range |
| CD9502 | FlexRay, Message (requirement engine torque drive train sum stability, 43.1.4): Alive test |
| CD9504 | FlexRay, Message (requirement engine torques drive train sum stability, 43.1.4): Absent |
| CD9505 | SCR interface (fluid level status, SCR fuel additive, 0x40B): Signal invalid |
| CD9506 | No message (fluid level status, SCR additive, 0x40B) missing, receiver: DME/DDE, transmitter: SCR |
| CD9507 | SCR interface (Status of available SCR fuel additive, 0x8A): Signal invalid |
| CD9508 | FlexRay, Message (requirement engine torque drive train sum stability, 43.1.4): Checksum error |
| CD9509 | Message (request, torque, crankshaft, gearbox 2, 0xA0) checksum error, receiver: DME/DDE, transmitter: EGS |
| CD950B | Message (request, torque, crankshaft, gearbox 2, 0xA0) out of date, receiver: DME/DDE, transmitter: EGS |
| CD950F | No message (request, torque, crankshaft, gearbox 2, 0xA0), receiver: DME/DDE, transmitter: EGS |
| CD9510 | Message (RQ_TORQ_CRSH_GRB_2, 0xA0, FA): Message von transmission control unit failed |
| CD9511 | Message (status door sensors secured, 256.3.4) checksum error, receiver: DME/DDE, transmitter: footwell module (FRM) |
| CD9512 | Message (status door sensors secured, 256.3.4) out of date, receiver: DME/DDE, transmitter: footwell module (FRM) |
| CD9513 | Interface footwell module (FRM) (STATUS door sensors secured, 256.3.4): Signal invalid |
| CD9514 | Message (status door sensors secured, 256.3.4) absent, receiver: DME/DDE, transmitter: footwell module (FRM) |
| CD9515 | M message (data, transmission line, 0x1AF) faulty, receiver: DME/DDE, EGS transmitter |
| CD9516 | Message (inclination roadway / steering angle front axle effective, 56.1.2) checksum error, receiver: DME/DDE, transmitter: integrated chassis management (ICM) |
DEFINISSEZ VOTRE MARQUE POUR ACCEDER A VOS CODES DEFAUTS
LES PRODUITS DISPONIBLES POUR VOTRE AUTO
-
Revue technique RTA
Revue Technique Automobile
La revue technique de référence depuis 1946. La RTA est une revue papier pour tous publics, qui vous permet d'effectuer les petites et les grosses réparations
Voir le descriptif
-
Entretien courant MTA
Méthode Technique Automobile
La MTA est issue de nos outils destinés aux pros de l'auto. Ces méthodes en ligne permettent d'effectuer les opérations de maintenances de votre auto (filtres, courroies, etc.)
Voir le descriptif
-
Toutes réparations MTAx
Méthode Technique Automobile Expert
La MTA expert est un outil en ligne destiné aux experts en mécanique et en carrosserie, pour effectuer tous types de réparations sur une voiture.
Voir le descriptif