Que signifie votre code Code Défaut BMW ?
Grace au système OBD, les
Bmw
fabriqués après 1996 sont normalement équipés d'une prise diagnostique OBD.
Si l'ordinateur de la voiture rencontre un problème,un code d'erreur ou un code de diagnostic (DTC)
sera stocké dans la mémoire de l'ECU de la voiture.
Avec un lecteur OBD branché sur le port OBD (On-Board Diagnostics) de la voiture, vous pouvez lire la liste des codes stockés, et donc découvrir quel est le problème.
Les codes suivent une formule permettant de savoir généralement quel est le problème avant même de regarder le tableau ci-dessous.
Nous vous présentons ci-dessus une liste très complète des différents codes défauts possibles.
Si le code défaut de votre auto s'affiche au tableau de bord, vous n'aurez peut-être même pas besoin d'un lecteur OBD . il sera dans la liste .
Réparer le code défaut de votre auto, c'est potentiellement simple à faire avec vos revues et méthodes techniques.
Réparer le code défaut de votre auto, c’est potentiellement simple à faire avec nos revues et méthodes techniques
| Code | Libellé |
|---|---|
| D015DC | Message (parametrisation status, I-brake, 43.3.4) missing, receiver: ICM, transmitter: ABS |
| D015DD | Message (parametering of adaptive dynamic brake control, 43.3.4) checksum incorrect, receiver: ICM, transmitter: ABS |
| D015DE | Message (parametrisation status, I-brake, 43.3.4) out-of-date, receiver: ICM, transmitter: ABS |
| D015FC | Message (ambient brightness status, 264.6.8) missing, received by ICM, transmitted by FEM / JBE / BDC-ZGM |
| D01602 | No message (status Servotronic ECO, 241.0.2), receiver: ICM, transmitter: Servotronic |
| D01604 | Message (status Servotronic ECO, 241.0.2) out of date, receiver: ICM, transmitter: Servotronic |
| D01609 | Signal (Servotronic ECO status, 241.0.2) undefined: transmitter: Servotronic |
| D01628 | No message (front axle steering status, 48.0.2), receiver: ICM, transmitter: ASA |
| D01629 | Message (front axle steering status, 48.0.2) checksum error, receiver: ICM, transmitter: ASA |
| D0162A | Message (front axle steering status, 48.0.2) out of date, receiver: ICM, transmitter: ASA |
| D01641 | Signal (ambient brightness status 264.6.8) invalid, transmitted by FEM / JBE / BDC-ZGM |
| D01646 | Message (angle, accelerator pedal, 40.1.4) missing, receiver: ICM, transmitter: Engine |
| D01647 | Message (angle, accelerator pedal, 40.1.4) checksum incorrect, receiver: ICM, transmitter: Engine |
| D01648 | Message (angle, accelerator pedal, 40.1.4) not up-to-date, receiver: ICM, transmitter: Engine |
| D0164C | Engine interface (angle, accelerator pedal, 40.1.4): Signal invalid |
| D0164D | Signal (accelerator pedal angle, 40.1.4) undefined: dME/DDE transmitter |
| D01652 | Message (central locking and lid status, 116.1.2) missing, receiver: ICM, transmitter: Car access system (CAS) |
| D01658 | No message (status of tyres, 272.3.8), receiver ICM, transmitter DSC |
| D01659 | Message (status, tyres, 272.3.8) checksum error, receiver ICM, transmitter DSC |
| D0165A | Message (status, tyres, 272.3.8) not current, receiver ICM, transmitter DSC |
| D01660 | Message (actuation request, parking brake, 130.1.2) missing, receiver: ICM, transmitter: ABS |
| D01661 | Message (actuation request, parking brake, 130.1.2) checksum incorrect, receiver: ICM, transmitter: ABS |
| D01662 | Message (actuation request, parking brake, 130.1.2) not up-to-date, receiver: ICM, transmitter: ABS |
| D01665 | Signal (distance message, PDC, rear, 262.1.4) undefined: JBE, PMA, REM transmitter |
| D01666 | DSC interface (actuation request, parking brake, 130.1.2): Signal invalid |
| D01667 | DSC interface (positioning request, parking brake, 130.1.2): Signal invalid |
| D01669 | Signal (parking brake actuation request, 130.1.2) undefined: transmitter: ABS |
| D0167B | Message (request parking system activation, 267.3.4) absent, receiver: ICM, transmitter: HU |
| D0167D | Message (board network BN2020 unit, 252.0.4) absent, receiver: ICM, transmitter: Instrument cluster |
| D01691 | Message (status rear spoiler BN2020, 235.0.2) missing, receiver ICM, transmitter HKFM |
| D01697 | Message (Status parking system 2, 267.0.4) absent, receiver: ICM, transmitter: PDC |
| D016A5 | Message (display, Checkcontrol driving dynamics 02, 218.11.32) missing, receiver: ICM, transmitter: EPS |
| D016A7 | No message (distance message, PDC at front, 262.3.4), receiver: ICM, transmitter: PDC, PMA, REM |
| D016A9 | Message (Status Lane departure warning system, 258.2.4) absent, receiver: ICM, transmitter: Camera-based driver assistance systems (KAFAS) |
| D016AB | Interface PDC, PMA, REM (distance message PDC at front, 262.3.4): Signal invalid |
| D016AD | Signal (distance message PDC at front, 262.3.4) undefined: transmitter: PDC, PMA, REM |
| D016B6 | Message (display, Checkcontrol driving dynamics 02, 218.11.32) not up-to-date, receiver: ICM, transmitter: EPS |
| D016B7 | Message (display, Checkcontrol driving dynamics 02, 218.11.32) checksum incorrect, receiver: ICM, transmitter: EPS |
| D016CB | Message (status rear spoiler BN2020, 235.0.2) checksum incorrect, receiver ICM, transmitter HKFM |
| D016DC | Message (status display of driving dynamics, 97.1.2) missing, receiver: ICM, transmitter: Instrument cluster |
| D016DD | Message (status display, driving dynamics, 97.1.2) checksum incorrect, receiver: ICM, transmitter: Instrument cluster |
| D016DE | Message (status display, driving dynamics, 97.1.2) out-of-date, receiver: ICM, transmitter: Instrument cluster |
| D016E1 | Instrument cluster interface (status display, driving dynamics, 97.1.2): Signal invalid |
| D016E2 | Signal (status display, driving dynamics, 97.1.2) undefined: transmitter: Instrument cluster |
| D016E4 | Message (distribution status, longitudinal moment, front axle, rear axle, 19.3.4) missing, receiver: ICM, transmitter: transfer car access system (CAS)e (LVM) |
| D016E5 | Message (distribution status, longitudinal moment, front axle, rear axle, 19.3.4) checksum incorrect, receiver: ICM, transmitter: transfer car access system (CAS)e (LVM) |
| D016E6 | Message (distribution status, longitudinal moment, front axle rear axle, 19.3.4) out-of-date, receiver: ICM, transmitter: transfer car access system (CAS)e (LVM) |
| D016F2 | No message (display, Check Control driving dynamics 03, 218.13.32), receiver: ICM, transmitter: vertical dynamic management (VDM), ICM |
| D016F3 | Message (display, Check Control driving dynamics 03, 218.13.32) out of date, receiver: ICM, transmitter: vertical dynamic management (VDM), ICM |
| D016F5 | Message (status, seat belt, contact, seat occupancy, 275.6.8) missing, receiver: ICM, transmitter: Airbag |
| D016F6 | Message (status, seat belt, contact, seat occupancy, 275.6.8) out-of-date, receiver: ICM, transmitter: Airbag |
| D016FB | Message (display, Checkcontrol driving dynamics 03, 218.13.32) checksum incorrect, receiver: ICM, transmitter: vertical dynamic management (VDM) |
| D01709 | Integrated chassis management (ICM) interface (request, crankshaft torque ARS, 35.3.4): Signal invalid |
| D01711 | Interface HU (request activation parking system, 267.3.4): Signal invalid |
| D01713 | Interface instrument cluster (board network BN2020 unit, 252.0.4) Signal invalid |
| D01722 | Interface HU, ZGM (operation of I-Drive FAS, 254.3.4): Signal invalid |
| D0172A | Message (Status parking system 2, 267.0.4) out of date, receiver: ICM, transmitter: PDC |
| D01730 | Message (status rear spoiler BN2020, 235.0.2) not current, receiver ICM, transmitter HKFM |
| D01736 | Interface FEM, SZL (operation of cruise control, 233.1.2): Signal invalid |
| D01748 | VDM, ICM interface (display, Check Control driving dynamics 03, 218.13.32): Signal invalid |
| D01749 | Message (data, lane detection 1, 96.0.4) missing, receiver: ICM, transmitter: Camera-based driver support systems |
| D0174A | Message (data, lane detection 1, 96.0.4) checksum incorrect, receiver: ICM, transmitter: Camera-based driver support systems |
| D0174B | Message (data, lane detection 1, 96.0.4) not up-to-date, receiver: ICM, transmitter: Camera-based driver support systems |
| D0174C | Message (Status Lane departure warning system, 258.2.4) out of date, receiver: ICM, transmitter: Camera-based driver assistance systems (KAFAS) |
| D0177A | Interface PDC (Status System Parken 2, 267.0.4): Signal invalid |
| D0177D | Interface HKFM (Status Heckspoiler board network BN2020, 235.0.2) Signal invalid |
| D01782 | Message (data, function, hill descent control, 44.1.4) missing, receiver: ICM, transmitter: ABS |
| D01783 | Message (data, function, hill descent control, 44.1.4) checksum incorrect, receiver: ICM, transmitter: ABS |
| D01784 | Message (data, function, hill descent control, 44.1.4) not up-to-date, receiver: ICM, transmitter: ABS |
| D01786 | Interface DSC (data, function, HDC, 44.1.4): Signal invalid |
| D01788 | Interface camera-based driver assistance systems (KAFAS) (Status Lane departure warning system, 258.2.4) Signal invalid |
| D0178C | Message (rollover sensor, 18.0.1) missing, receiver: ICM, transmitter: Multiple restraint system |
| D0178D | Message (rollover sensor, 18.0.1) checksum incorrect, receiver: ICM, transmitter: Multiple restraint system |
| D0178E | Message (rollover sensor, 18.0.1) not up-to-date, receiver: ICM, transmitter: Multiple restraint system |
| D01790 | Multiple restraint system interface (rollover sensor, 18.0.1): Signal invalid |
| D01791 | Signal (rollover sensor, 18.0.1) undefined, transmitter: Multiple restraint system |
| D01793 | Interface DSC (control diagnose OBD vehicle dynamics, 247.0.2) Signal invalid |
| D017A3 | DSC interface (actual number of sensor edges, 64.1.2): Signal invalid |
| D017AF | DSC interface (actual braking torque, wheel, 44.3.4): Signal invalid |
| D017BB | DSC interface (actual braking torque, sum, 43.3.4): Signal invalid |
| D017C1 | Message (actual speed, wheel, 46.0.1) missing, receiver: ICM, transmitter: ABS |
| D017C2 | Message (actual speed, wheel, 46.0.1) checksum incorrect, receiver: ICM, transmitter: ABS |
| D017C3 | Message (actual speed, wheel, 46.0.1) out-of-date, receiver: ICM, transmitter: ABS |
| D017C5 | Interface DSC (actual speed, wheel, 46.0.1): Signal invalid |
| D017C6 | Signal (actual speed, wheel, 46.0.1) undefined: transmitter: ABS |
| D017CD | Message (actual speed, wheel not saved, ID: 0x254) missing, receiver: ICM, transmitter: ABS |
| D017D1 | Interface (actual speed, wheel not saved, ID: 0x254) signal invalid |
| D017E8 | Interface FEM,footwell module (FRM) (lamp status, 242.0.2): Signal invalid |
| D017EA | Message (control, LCD brightness, 252.3.4) missing, receiver: ICM, transmitter: Instrument cluster |
| D017F0 | Message (steering angle, driver, diagnosis, 261.1.4) missing, receiver: ICM, transmitter: Steering column switch cluster |
| D017FD | No message (navigation, GPS 1, 277.4.8), receiver: ICM, transmitter: HU, ZGM |
| D01801 | Interface HU, ZGM (navigation, GPS 1, 277.4.8): Signal invalid |
| D01802 | Signal (navigation, GPS 1, 277.4.8) undefined: transmitter: HU, ZGM |
| D01805 | No message (navigation, GPS 2, 277.2.8), receiver: ICM, transmitter: HU, ZGM |
| D01809 | Interface HU, ZGM (navigation, GPS 2, 277.2.8): Signal invalid |
| D0180A | Signal (navigation, GPS 2, 277.2.8) undefined: transmitter: HU, ZGM |
| D0180D | Signal (request activation parking system, 267.3.4) undefined: Transmitter HU |
| D01811 | No message (navigation system information, 277.6.8), receiver: ICM, transmitter: HU, ZGM |
| D01815 | Interface HU, ZGM (navigation system information, 277.6.8): Signal invalid |
| D01816 | Signal (Navigation System Information, 277.6.8) undefined: transmitter: HU, ZGM |
DEFINISSEZ VOTRE MARQUE POUR ACCEDER A VOS CODES DEFAUTS
LES PRODUITS DISPONIBLES POUR VOTRE AUTO
-
Revue technique RTA
Revue Technique Automobile
La revue technique de référence depuis 1946. La RTA est une revue papier pour tous publics, qui vous permet d'effectuer les petites et les grosses réparations
Voir le descriptif
-
Entretien courant MTA
Méthode Technique Automobile
La MTA est issue de nos outils destinés aux pros de l'auto. Ces méthodes en ligne permettent d'effectuer les opérations de maintenances de votre auto (filtres, courroies, etc.)
Voir le descriptif
-
Toutes réparations MTAx
Méthode Technique Automobile Expert
La MTA expert est un outil en ligne destiné aux experts en mécanique et en carrosserie, pour effectuer tous types de réparations sur une voiture.
Voir le descriptif