Que signifie votre code Code Défaut BMW ?
Grace au système OBD, les
Bmw
fabriqués après 1996 sont normalement équipés d'une prise diagnostique OBD.
Si l'ordinateur de la voiture rencontre un problème,un code d'erreur ou un code de diagnostic (DTC)
sera stocké dans la mémoire de l'ECU de la voiture.
Avec un lecteur OBD branché sur le port OBD (On-Board Diagnostics) de la voiture, vous pouvez lire la liste des codes stockés, et donc découvrir quel est le problème.
Les codes suivent une formule permettant de savoir généralement quel est le problème avant même de regarder le tableau ci-dessous.
Nous vous présentons ci-dessus une liste très complète des différents codes défauts possibles.
Si le code défaut de votre auto s'affiche au tableau de bord, vous n'aurez peut-être même pas besoin d'un lecteur OBD . il sera dans la liste .
Réparer le code défaut de votre auto, c'est potentiellement simple à faire avec vos revues et méthodes techniques.
Réparer le code défaut de votre auto, c’est potentiellement simple à faire avec nos revues et méthodes techniques
| Code | Libellé |
|---|---|
| D0181B | Message (navigation graph, 253.3.4) missing, receiver: ICM, transmitter: Central gateway module |
| D0181F | Interface HU, ZGM (navigation graph, 253.3.4): Signal invalid |
| D01820 | Signal (navigation graph, 253.3.4) undefined: transmitter: HU, ZGM |
| D01826 | Signal (Status Heckspoiler board network BN2020, 235.0.2) undefiniert |
| D0182A | Signal (Status parking system 2, 267.0.4) undefined: Transmitter PDC |
| D01831 | Message (Navigationsgraph Fahrspur, 137.1.2) absent, receiver: ICM, transmitter: HU |
| D01835 | Interface HU, ZGM (navigation graph, 254.1.4): Signal invalid |
| D01836 | Signal (navigation graph, lane, 254.1.4) undefined: transmitter: HU, ZGM |
| D0183B | Message (navigation graph, speed, 254.2.4) missing, receiver: ICM, transmitter: Central gateway module |
| D0183F | Interface HU, ZGM (navigation graph, 254.2.4): Signal invalid |
| D01840 | Signal (navigation graph, speed, 254.2.4) undefined: transmitter: HU, ZGM |
| D01855 | Interface HU, ZGM (PIA data request, 255.0.4): Signal invalid |
| D01856 | Signal (PIA data prompt, 255.0.4) undefined: transmitter: HU, ZGM |
| D0185E | Interface HU, ZGM (Set PIA data, 255.1.4): Signal invalid |
| D0185F | Signal (PIA set data, 255.1.4) undefined: transmitter: HU, ZGM |
| D01868 | Interface HU, ZGM (PIA configuration, 255.2.4): Signal invalid |
| D01869 | Signal (PIA configuration, 255.2.4) undefined: transmitter: HU, ZGM |
| D0186C | No message (PIA transaction, 255.3.4), receiver: ICM, transmitter: HU, ZGM |
| D01870 | Interface HU, ZGM (PIA transaction, 255.3.4): Signal invalid |
| D01871 | Signal (PIA transaction, 255.3.4) undefined: transmitter: HU, ZGM |
| D01872 | Camera-based driver support systems interface (data, lane detection 1, 96.0.4): Signal invalid |
| D018B5 | Message (status display, Instrument cluster, 97.0.2) missing, receiver: ICM, transmitter, Instrument cluster |
| D018B6 | Message (display, Instrument cluster, 97.0.2) checksum incorrect, receiver: ICM, transmitter: Instrument cluster |
| D018B7 | Message (display, Instrument cluster, 97.0.2) not up-to-date, receiver: ICM, transmitter: Instrument cluster |
| D018B9 | Interface, Instrument cluster (status display, Instrument cluster, 97.0.2): Signal invalid |
| D018BA | Signal (status display, Instrument cluster, 97.0.2) undefined: transmitter: Instrument cluster |
| D018BB | Message (status display, warning of lane change, 256.0.4) missing, receiver: ICM, transmitter: FEM,footwell module (FRM) |
| D018BF | Interface FEM,footwell module (FRM) (status display, warning of lane change, 256.0.4): Signal invalid |
| D018C0 | Signal (status display, warning of lane change, 256.0.4) undefined: transmitter: FEM,footwell module (FRM) |
| D018C7 | Message (status of operating element, warning of vehicle leaving its lane, 98.1.2) missing, receiver: ICM, transmitter: FEM,footwell module (FRM) |
| D018CF | Message (status, operating element, warning of lane change, 99.0.2) missing, receiver: ICM, transmitter: FEM,footwell module (FRM) |
| D018D3 | Interface FEM,footwell module (FRM) (status, operating element, warning of lane change, 99.0.2): Signal invalid |
| D018D4 | Signal (status, operating element, warning of lane change, 99.0.2) undefined: transmitter: FEM,footwell module (FRM) |
| D018DC | No message (status, function, PDC, 241.1.2), receiver: ICM, transmitter: PDC, PMA, REM |
| D018DD | Message (Status function PDC, 241.1.2) checksum error, receiver: ICM, transmitter: PDC |
| D018DE | Message (status, function. PDC, 241.1.2) out of date, receiver: ICM, transmitter: PDC, PMA, REM |
| D018E6 | Message (park assist status, 231.1.2) missing, receiver: ICM, transmitter: PMA |
| D018E8 | Message (RDC tyre status, 280.0.8) missing, receiver: ICM, transmitter: tyre pressure control |
| D018E9 | Message (RDC tyre status, 280.0.8) checksum incorrect, receiver: ICM, transmitter: tyre pressure control |
| D018EA | Message (RDC tyre status, 280.0.8) out-of-date, receiver: ICM, transmitter: tyre pressure control |
| D018EC | Interface tyre pressure control (RDC tyre status, 280.0.8): Signal invalid |
| D01901 | Message (steering wheel vibration status, 268.0.4) missing, receiver: ICM, transmitter: FEM, SZL |
| D01903 | Interface FEM, SZL (steering wheel vibration status, 268.0.4): Signal invalid |
| D01904 | Signal (steering wheel vibration status, 268.0.4) undefined: transmitter: FEM, SZL |
| D01912 | Message (synchronisation, navigation graph, 253.0.4) not up-to-date, receiver: ICM, transmitter: Central gateway module |
| D01914 | Interface CHAMP, CIC, ZGM (synchronisation of navigation graph, 253.0.4): Signal invalid |
| D01915 | Signal (synchronisation of navigation graph, 253.0.4) undefined: transmitter: HU, ZGM |
| D01922 | No message (match navigation graph, 254.0.4), receiver: ICM, transmitter: HU, ZGM |
| D01926 | Interface HU, ZGM (navigation graph, 254.0.4): Signal invalid |
| D01927 | Signal (compliance with navigation graph, 254.0.4) undefined: transmitter: HU, ZGM |
| D01932 | Message (time/date, 276.6.8) missing, receiver: ICM, transmitter: Instrument cluster |
| D01936 | Interface Instrument cluster (time/date, 276.6.8): Signal invalid |
| D01937 | Signal (time/date, 276.6.8) undefined: transmitter: Instrument cluster |
| D0193C | No message (specification of damper component, passive, 72.1.2), receiver: ICM, transmitter: vertical dynamic management (VDM), ICM |
| D0193D | Message (specification of damper component, passive, 72.1.2) checksum incorrect, receiver: ICM, transmitter: vertical dynamic management (VDM) |
| D0193E | Message (specification of damper component, passive, 72.1.2) out of date, receiver: ICM, transmitter: vertical dynamic management (VDM), ICM |
| D01941 | Signal (specification, damper, passive proportion, 72.1.2) undefined: transmitter: vertical dynamic management (VDM), ICM |
| D0194E | Message (rolling moment, vehicle, 35.0.2) missing, receiver: ICM, transmitter: vertical dynamic management (VDM) |
| D0195B | Message (warning, lane change, 37.3.8) missing, receiver: ICM, transmitter: lane change warning |
| D0195C | Message (warning, lane change, 37.3.8) checksum incorrect, receiver: ICM, transmitter: lane change warning |
| D0195D | Message (warning, lane change, 37.3.8) not up-to-date, receiver: ICM, transmitter: lane change warning |
| D0195F | Lane change warning interface (warning, lane change, 37.3.8): Signal invalid |
| D01964 | Message (dome acceleration, vehicle, 5.0.1) missing, receiver: ICM, transmitter: vertical dynamic management (VDM) |
| D01965 | Message (dome acceleration, vehicle, 5.0.1) checksum incorrect, receiver: ICM, transmitter: vertical dynamic management (VDM) |
| D01966 | Message (dome acceleration, vehicle, 5.0.1) not up-to-date, receiver: ICM, transmitter: vertical dynamic management (VDM) |
| D01968 | VDM interface (dome acceleration, vehicle, 5.0.1): Signal invalid |
| D01969 | Signal (dome acceleration, vehicle, 5.0.1) undefined, transmitter: vertical dynamic management (VDM) |
| D0196D | Interface SZL (steering angle, driver, diagnosis, 261.1.4): Signal invalid |
| D01995 | Interface DSC (status, parametrisation, I-Brake, 43.3.4): Signal invalid |
| D01996 | PMA interface (park assist status, 231.1.2): Signal invalid |
| D019B7 | Message (dimming, 240.1.2) missing, receiver: ICM, transmitter: FEM,footwell module (FRM) |
| D019B9 | Interface FEM,footwell module (FRM) (dimming, 240.1.2): Signal invalid |
| D019BF | Message (actual steering torque, driver, actuator, 49.0.2) missing, receiver: ICM, transmitter: EPS |
| D019C0 | Message (actual steering torque, driver, actuator, 49.0.2) checksum incorrect, receiver: ICM, transmitter: EPS |
| D019C1 | Message (actual steering torque, driver, actuator, 49.0.2) not up-to-date, receiver: ICM, transmitter: EPS |
| D019C3 | Interface EPS (actual steering torque, driver, actuator, 49.0.2): Signal invalid |
| D01A1B | Message (status, yaw moment distribution, 112.0.2) missing, receiver: ICM, transmitter: ABS |
| D01A1C | Message (status, yaw moment distribution, 112.0.2) checksum incorrect, receiver: ICM, transmitter: ABS |
| D01A1D | Message (status, yaw moment distribution, 112.0.2) out-of-date, receiver: ICM, transmitter: ABS |
| D01A1F | Interface DSC (status, yaw moment distribution, 112.0.2): Signal invalid |
| D01A28 | Open 2011-09-07 Message (Status parking system, ID: ST_SY_PKG) absent, receiver: ICM, transmitter: PDC/PMA |
| D01A29 | Open 2011-09-07 Message (Status parking system, ID: ST_SY_PKG) checksum error, receiver: ICM, transmitter: PDC/PMA |
| D01A2A | Open 2011-09-07 Message (Status parking system, ID: ST_SY_PKG) out of date, receiver: ICM, transmitter: PDC/PMA |
| D01A2C | offen 2011-09-07 Interface PDC/PMA (Status parking system, ID: ST_SY_PKG): Signal invalid |
| D01A2D | offen 2011-09-07 Signal (Status parking system, ID: ST_SY_PKG) undefined: Transmitter PDC/PMA |
| D01A77 | Message (status, snow chain, 265.1.4) out-of-date, receiver: ICM, transmitter: HSR |
| D01A7D | Message (status, snow chain, 265.1.4) missing, receiver: ICM, transmitter: HSR |
| D01A7E | Message (status, snow chain, 265.1.4) checksum incorrect, receiver: ICM, transmitter: HSR |
| D01A7F | Interface HSR (status, snow chain, 265.1.4): Signal invalid |
| D01B00 | Message (request, hydraulic function, 100.1.2) missing, receiver: ICM, transmitter: parking brake |
| D01B01 | Message (request, hydraulic function, 100.1.2) checksum incorrect, receiver: ICM, transmitter: parking brake |
| D01B02 | Message (request, hydraulic function, 100.1.2) not up-to-date, receiver: ICM, transmitter: parking brake |
| D01B03 | EMF interface (request, hydraulic function, 100.1.2): Signal invalid |
| D01B05 | Signal (request, hydraulic function, 100.1.2) undefined: EMF transmitter |
| D01B06 | Message (proportion, rolling moment, stabilisation, 35.0.2) missing, receiver: ICM, transmitter: vertical dynamic management (VDM) |
| D01B09 | Signal (proportion of rolling moment, stabilisation, 35.0.2) undefined: transmitter: vertical dynamic management (VDM) |
| D01B0A | Message (display, Checkcontrol driving dynamics 04, 218.15.32) missing, receiver: ICM, transmitter: PMA |
| D01B0B | Message (display, Checkcontrol driving dynamics 04, 218.15.32) checksum incorrect, receiver: ICM, transmitter: PMA |
| D01B0C | Message (display, Checkcontrol driving dynamics 04, 218.15.32) not up-to-date, receiver: ICM, transmitter: PMA |
| D01B0E | PMA interface (display, Checkcontrol driving dynamics 04, 218.15.32): Signal invalid |
DEFINISSEZ VOTRE MARQUE POUR ACCEDER A VOS CODES DEFAUTS
LES PRODUITS DISPONIBLES POUR VOTRE AUTO
-
Revue technique RTA
Revue Technique Automobile
La revue technique de référence depuis 1946. La RTA est une revue papier pour tous publics, qui vous permet d'effectuer les petites et les grosses réparations
Voir le descriptif
-
Entretien courant MTA
Méthode Technique Automobile
La MTA est issue de nos outils destinés aux pros de l'auto. Ces méthodes en ligne permettent d'effectuer les opérations de maintenances de votre auto (filtres, courroies, etc.)
Voir le descriptif
-
Toutes réparations MTAx
Méthode Technique Automobile Expert
La MTA expert est un outil en ligne destiné aux experts en mécanique et en carrosserie, pour effectuer tous types de réparations sur une voiture.
Voir le descriptif