Que signifie votre code Code Défaut BMW ?
Grace au système OBD, les
Bmw
fabriqués après 1996 sont normalement équipés d'une prise diagnostique OBD.
Si l'ordinateur de la voiture rencontre un problème,un code d'erreur ou un code de diagnostic (DTC)
sera stocké dans la mémoire de l'ECU de la voiture.
Avec un lecteur OBD branché sur le port OBD (On-Board Diagnostics) de la voiture, vous pouvez lire la liste des codes stockés, et donc découvrir quel est le problème.
Les codes suivent une formule permettant de savoir généralement quel est le problème avant même de regarder le tableau ci-dessous.
Nous vous présentons ci-dessus une liste très complète des différents codes défauts possibles.
Si le code défaut de votre auto s'affiche au tableau de bord, vous n'aurez peut-être même pas besoin d'un lecteur OBD . il sera dans la liste .
Réparer le code défaut de votre auto, c'est potentiellement simple à faire avec vos revues et méthodes techniques.
Réparer le code défaut de votre auto, c’est potentiellement simple à faire avec nos revues et méthodes techniques
| Code | Libellé |
|---|---|
| D01B11 | Interface CHAMP, CIC, ZGM (operation of individualisation switch for driving dynamics, 275.2.8): Signal invalid |
| D01B14 | Interface ZGM (operation, switch, snow chain, 278.4.8): Signal invalid |
| D01B17 | Interface HU (services - PIA_Dienst): Signal invalid |
| D01B3E | DSC interface (Qualifier service ECBA, 63.1.4): Signal invalid |
| D01B50 | Interface DSC (setpoint braking torque, sum, coordinated, 63.1.4): Signal invalid |
| D01B56 | DSC interface (vehicle standstill, 263.1.4): Signal invalid |
| D01B63 | Message (status of RPA tyres, 280.1.8) missing, receiver: ICM, transmitter: ABS |
| D01B64 | Message (status, RPA tyres, 280.1.8) checksum incorrect, receiver: ICM, transmitter: ABS |
| D01B65 | Message (status, RPA tyres, 280.1.8) out-of-date, receiver: ICM, transmitter: ABS |
| D01B67 | Interface DSC (status, RPA tyres, 280.1.8): Signal invalid |
| D01B7C | Message (status, self-levelling suspension, vehicle, 259.3.4) missing, receiver: ICM, transmitter: EHC |
| D01B7D | Message (self-levelling suspension, vehicle, 259.3.4) checksum incorrect, receiver: ICM, transmitter: EHC |
| D01B7E | Message (self-levelling suspension, vehicle, 259.3.4) not up-to-date, receiver: ICM, transmitter: EHC |
| D01B80 | Interface EHC (status, self-levelling suspension, vehicle, 259.3.4): Signal invalid |
| D01B81 | Signal (status, self-levelling suspension, vehicle, 259.3.4) undefined: transmitter: EHC |
| D01C00 | Message (data, lane detection 2, 96.0.4) missing, receiver: ICM, transmitter: Camera-based driver support systems |
| D01C01 | Message (data, lane detection 2, 96.0.4) checksum incorrect, receiver: ICM, transmitter: Camera-based driver support systems |
| D01C02 | Message (data, lane detection 2, 96.0.4) not up-to-date, receiver: ICM, transmitter: Camera-based driver support systems |
| D01C03 | Message (data, lane detection 3, 96.0.4) missing, receiver: ICM, transmitter: Camera-based driver support systems |
| D01C04 | Message (data, lane detection 3, 96.0.4) checksum incorrect, receiver: ICM, transmitter: Camera-based driver support systems |
| D01C05 | Message (data, lane detection 3, 96.0.4) not up-to-date, receiver: ICM, transmitter: Camera-based driver support systems |
| D01C0A | Message (diagnosis of steering angle sensor, ID: dIAG_LWS) missing, receiver: ICM, transmitter: integrated chassis management (ICM) |
| D01C0F | Message (PreCrash detection, SF-CAN, 0x718) missing, receiver: ICM, transmitter: ACC |
| D01C11 | Message (PreCrash detection SF-CAN, 0x718) out-of-date, receiver: ICM, transmitter: ACC |
| D01C18 | Message (target wheel steering angle, front axle, park assist, 30.0.2) missing, receiver: ICM, transmitter: PMA |
| D01C1A | Message (nominal wheel steering angle, front axle, park assist, 30.0.2) out-of-date, receiver: ICM, transmitter: PMA |
| D01C1C | Message (status, reverse gear, 240.0.2) missing, receiver: ICM, transmitter: FEM,footwell module (FRM) |
| D02C00 | Signal (Checkcontrol display, driving dynamics 00, 218.5.32) undefined: transmitter: ABS |
| D02C01 | Signal (Checkcontrol display, driving dynamics 01, 218.9.32) undefined: transmitter: vertical dynamic management (VDM) |
| D02C03 | Signal (Checkcontrol display of driving dynamics 03, 218.13.32) undefined: transmitter: vertical dynamic management (VDM) |
| D02C04 | Signal (Checkcontrol display for driving dynamics 04, 218.15.32) undefined: transmitter: PMA |
| D02C05 | Signal (ambient temperature, 252.1.4) undefined: transmitter: Instrument cluster |
| D02C08 | Signal (operation, cruise control, 233.1.2) undefined: transmitter: FEM, JBE, SZL |
| D02C09 | Signal (operation, wash/wipe switch, 132.1.2) undefined: transmitter: FEM, JBE, SZL |
| D02C0B | Signal (brake assistant, long-range radar) undefined, transmitter: LRR |
| D02C0E | Signal (data, lane detection 1, 96.0.4) undefined: transmitter: Camera-based driver assistance systems (KAFAS) |
| D02C0F | Interface camera-based driver assistance systems (KAFAS) (data, lane detection 2, 96.0.4): Signal invalid |
| D02C10 | Signal (data lane detection 2, 96.0.4) undefined: transmitter: Camera-based driver assistance systems (KAFAS) |
| D02C11 | Interface camera-based driver assistance systems (KAFAS) (data, lane detection 3, 96.0.4): Signal invalid |
| D02C12 | Signal (data, lane detection 3, 96.0.4) undefined: transmitter: Camera-based driver assistance systems (KAFAS) |
| D02C18 | Signal (dimming, 240.1.2) undefined: transmitter: FEM,footwell module (FRM) |
| D02C1A | Signal (vehicle identification number, 275.7.8) undefined: transmitter: Car access system (CAS), FEM |
| D02C1F | Integrated chassis management (ICM) interface (diagnosis of steering angle sensor, ID: dIAG_LWS) Signal invalid |
| D02C20 | Signal (diagnosis of steering angle sensor, ID: dIAG_LWS) undefined |
| D02C27 | Signal (actual steering torque, driver, actuator, 49.0.2) undefined: transmitter: EPS |
| D02C2A | Signal (kilometre reading/range, 276.4.8) undefined: transmitter: Instrument cluster |
| D02C2C | Signal (LCD brightness control, 252.3.4) undefined: transmitter: Instrument cluster |
| D02C2D | Signal (steering angle, driver, diagnosis, 261.1.4) undefined: transmitter: Steering column switch (SZL) |
| D02C41 | PMA interface (target wheel steering angle, front axle, park assist, 30.0.2): Signal invalid |
| D02C42 | Signal (target steering angle, front axle, parking assistant, 30.0.2) undefined transmitter: PMA |
| D02C43 | Signal (nominal vibration, steering wheel, warning of vehicle leaving its lane, 258.0.4) undefined: transmitter: Camera-based driver assistance systems (KAFAS) |
| D02C49 | Interface FEM,footwell module (FRM) (status, reverse gear, 240.0.2): Signal invalid |
| D02C4A | Signal (reverse gear status, 240.0.2) undefined: transmitter: FEM,footwell module (FRM) |
| D02C4C | Signal (parking brake contact status, 243.1.2) invalid, transmitted by BDC-ZGM |
| D02C53 | Signal (park assistant status, 231.1.2) undefined: transmitter: PMA |
| D02C54 | Signal (RDC tyre status, 280.0.8) undefined: transmitter: tyre pressure control |
| D02C55 | Signal (status, RPA tyres, 280.1.8) undefined: transmitter: ABS |
| D02C56 | Signal (status, snow chain, 265.1.4) undefined: Rear axle slip angle control (HSR) transmitter |
| D02C5A | Interface JBE, PMA, REM (LED control for parking function, 259.0.4): Signal invalid |
| D02C5B | Signal (control of LED function for parking, 259.0.4) undefined: JBE, PMA, REM transmitter |
| D02C67 | DSC interface (status, DSC stabilisation, 47.1.2): Signal invalid |
| D02C7E | Signal (tyre status, 272.3.8) undefined, transmitter DSC |
| D02C81 | Interface FEM,footwell module (FRM) (status of pull sensors secured, 256.3.4): Signal invalid |
| D02C8F | Interface PMA (Umgebung Detektion Parken, 95.0.2): Signal invalid |
| D02D01 | Engine interface (angle, accelerator pedal, 40.1.4): Signal invalid |
| D02D02 | Interface DSC (first brake torque amount, 43.3.4) Signal invalid |
| D02D03 | Interface DSC (first brake torque wheel, 44.3.4) Signal invalid |
| D02D05 | Interface DSC (first wheel speed, 46.1.2) Signal invalid |
| D02D06 | Interface SZL (actual steering angle, driver, 59.0.2): Signal invalid |
| D02D07 | Interface EPS (actual steering torque, driver, actuator, 49.0.2): Signal invalid |
| D02D18 | Interface airbag (rollover sensor, 18.0.1): Signal invalid |
| D02D27 | Message (Status stability DSC 2, 47.1.2) out of date, receiver: ICM, transmitter: ABS |
| D02D29 | Signal (Status stability DSC 2, 47.1.2) undefined: Transmitter DSC |
| D02D2B | Message (Status stability DSC 2, 47.1.2) absent, receiver: ICM, transmitter: ABS |
| D02D2E | Interface DSC (Status stability DSC 2, 47.1.2): Signal invalid |
| D02D31 | Message (camera, front area monitoring, 96.1.2) missing, receiver ICM, transmitter 'camera-based driver support system' (KAFAS) |
| D02D33 | Message (camera, front area monitoring, 96.1.2) not current, receiver ICM, transmitter 'camera-based driver support system' (KAFAS) |
| D02D35 | Signal (front area monitoring camera, 96.1.2) undefined, transmitter KAFAS |
| D02D3A | Camera-based driver support system (KAFAS) interface (camera, front area monitoring, 96.1.2): Signal invalid |
| D02D47 | Interface HSR (steering, rear axle, 50.0.2): Signal invalid |
| D04C1E | LIN, communications (fuel tank pressure sensor): Missing |
| D05400 | Message (ambient temperature, 0x2CA) missing, received by TFE, transmitted by KOMBI |
| D0540B | Message (powertrain data 2, 0x3F9h) missing, received by TFE, transmitted by EDME |
| D0540D | Message (engine fuel consumption status, 0x2C4) missing, received by TFE, transmitted by EDME |
| D10 | CAN-Bus, missing message from the engine control unit |
| D1040B | Tyre pressure monitoring system (RDC) , K-CAN: line fault |
| D10414 | Tyre pressure monitoring system (RDC) , K-CAN: Communication fault |
| D1045F | Tyre pressure monitoring system (RDC): CAN-bus fault |
| D11400 | Message missing (terminals, 0x12F), tyre pressure control (RDC) receiver, car access system (CAS) / FEM transmitter |
| D11401 | No message (ambient temperature, 0x2CA), receiver: Tyre Pressure Monitor, transmitter: Instrument cluster |
| D11402 | No message (kilometre reading, 0x330), receiver: Tyre Pressure Monitor, transmitter: Instrument cluster |
| D11403 | No message (data, drive train, 0x3F9), receiver: Tyre Pressure Monitor, transmitter: Digital Motor Electronics/Digital Diesel Electronics |
| D11404 | No message (time display/date, 0x2F8), receiver: Tyre Pressure Monitor, transmitter: Instrument cluster |
| D11405 | No message (vehicle speed, 0x1A1), receiver: Tyre Pressure Monitor, transmitter: DIS module |
| D11406 | No message (reverse gear status, 0x3B0), receiver: tyre pressure control, transmitter: instrument cluster |
| D11407 | No message (status, reverse gear, 0x3B0), receiver: tyre pressure control, transmitter: footwell module (FRM)/FEM |
| D11422 | Tyre pressure monitoring system (RDC): CAN message (from the ABS or basic module) missing |
| D11424 | Tyre pressure monitoring system (RDC): CAN message (from the DME) missing |
| D11426 | Tyre pressure monitoring system (RDC): CAN message (from the KOMBI) missing |
| D14302 | CAN timeout |
DEFINISSEZ VOTRE MARQUE POUR ACCEDER A VOS CODES DEFAUTS
LES PRODUITS DISPONIBLES POUR VOTRE AUTO
-
Revue technique RTA
Revue Technique Automobile
La revue technique de référence depuis 1946. La RTA est une revue papier pour tous publics, qui vous permet d'effectuer les petites et les grosses réparations
Voir le descriptif
-
Entretien courant MTA
Méthode Technique Automobile
La MTA est issue de nos outils destinés aux pros de l'auto. Ces méthodes en ligne permettent d'effectuer les opérations de maintenances de votre auto (filtres, courroies, etc.)
Voir le descriptif
-
Toutes réparations MTAx
Méthode Technique Automobile Expert
La MTA expert est un outil en ligne destiné aux experts en mécanique et en carrosserie, pour effectuer tous types de réparations sur une voiture.
Voir le descriptif