Que signifie votre code Code Défaut BMW ?
Grace au système OBD, les
Bmw
fabriqués après 1996 sont normalement équipés d'une prise diagnostique OBD.
Si l'ordinateur de la voiture rencontre un problème,un code d'erreur ou un code de diagnostic (DTC)
sera stocké dans la mémoire de l'ECU de la voiture.
Avec un lecteur OBD branché sur le port OBD (On-Board Diagnostics) de la voiture, vous pouvez lire la liste des codes stockés, et donc découvrir quel est le problème.
Les codes suivent une formule permettant de savoir généralement quel est le problème avant même de regarder le tableau ci-dessous.
Nous vous présentons ci-dessus une liste très complète des différents codes défauts possibles.
Si le code défaut de votre auto s'affiche au tableau de bord, vous n'aurez peut-être même pas besoin d'un lecteur OBD . il sera dans la liste .
Réparer le code défaut de votre auto, c'est potentiellement simple à faire avec vos revues et méthodes techniques.
Réparer le code défaut de votre auto, c’est potentiellement simple à faire avec nos revues et méthodes techniques
| Code | Libellé |
|---|---|
| D14C02 | ACC: S-CAN line fault |
| D14C0A | ACC: S-CAN communication fault |
| D1540E | No message (vehicle dynamics data, 0x716), receiver: ACC, transmitter: integrated chassis management (ICM) |
| D1540F | Message (vehicle dynamics data, 0x716) checksum error, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15410 | Message (vehicle dynamics data, 0x716) out of date, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D1541E | No message (steering angle, front axle, effective, 0x71A), receiver: ACC, transmitter: integrated chassis management (ICM) |
| D1541F | Message (steering angle, front axle, effective, 0x71A) checksum error, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15423 | Message (steering angle, front axle, effective, 0x71A) out-of-date, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D1544E | Interface car access system (CAS), FEM, ICM-QL (vehicle identification number, ID: 275.7.8), signal invalid |
| D15482 | No message (vehicle identification number, ID: 275.7.8) missing, receiver: ACC, transmitter: Car access system (CAS), ICM |
| D154B8 | No message (vehicle speed, 0x1A1), receiver: ACC, transmitter: integrated chassis management (ICM) |
| D154B9 | Message (vehicle speed, 0x1A1) checksum error, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D154BA | Message (vehicle speed, 0x1A1) out of date, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D154BE | ICM interface (vehicle speed, 0x1A1) signal invalid |
| D154BF | Signal (vehicle speed, 0x1A1) undefined, transmitter: integrated chassis management (ICM) |
| D154C2 | No message (yaw rate, vehicle, 0x19F), receiver: ACC, transmitter: integrated chassis management (ICM) |
| D154C3 | Message (yaw rate, vehicle, 0x19F) checksum error, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D154C4 | Message (yaw rate, vehicle, 0x19F) out of date, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D154C8 | ICM interface (yaw velocity vehicle, 0x19F) signal invalid |
| D154C9 | Signal (yaw rate, vehicle, 0x19F) undefined, transmitter: integrated chassis management (ICM) |
| D1551C | ICM interface (centre of gravity longitudinal acceleration, 0x199) signal invalid |
| D1551D | Signal (centre of gravity longitudinal acceleration, 0x199) undefined, transmitter |
| D15542 | No message (lateral acceleration, centre of gravity, 0x19A), receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15543 | Message (lateral acceleration, centre of gravity, 0x19A) checksum fault, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15544 | Message (lateral acceleration, centre of gravity, 0x19A) out of date, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15548 | ICM interface (lateral acceleration centre of gravity, 0x19A) signal invalid |
| D15549 | Signal (lateral acceleration centre of gravity, 0x19A) undefined, transmitter: integrated chassis management (ICM) |
| D15724 | No message (navigation data, 0x735), receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15728 | ICM interface (navigation data, 0x735) signal invalid |
| D15729 | Signal (navigation data, 0x735) undefined, transmitter: integrated chassis management (ICM) |
| D159CE | No message (conditioning, Dynamic Brake Control, front area monitoring, 0x72E), receiver: ACC, transmitter: integrated chassis management (ICM) |
| D159CF | Message (conditioning, Dynamic Brake Control, front area monitoring, 0x72E) checksum error, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D159D0 | Message (conditioning, Dynamic Brake Control, front area monitoring, 0x72E) out of date, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D159D2 | ICM interface (conditioning Dynamic Brake Control, front area monitoring, 0x72E) signal invalid |
| D159D3 | Signal (conditioning Dynamic Brake Control, front area monitoring, 0x72E) undefined, transmitter: integrated chassis management (ICM) |
| D15A3F | Signal (vehicle yaw rate, 0x19F) invalid, transmitter ICM |
| D15A57 | ICM interface (longitudinal acceleration centre of gravity, 0x199) signal invalid |
| D15A62 | ICM interface (lateral acceleration centre of gravity, 0x19A) signal invalid |
| D15B2C | No message (longitudinal acceleration, centre of gravity, 0x199), receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15B2E | Message (longitudinal acceleration, centre of gravity, 0x199) checksum error, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15B2F | Message (longitudinal acceleration, centre of gravity, 0x199) out of date, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15B61 | ICM interface (status LDM, 0x702) signal invalid |
| D15C09 | No message (vehicle dynamic data, estimated S-CAN, 0x717), receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15C25 | ICM interface (driver action braking torque, 0x715) signal invalid |
| D15C27 | ICM interface (driver action braking torque, 0x715) signal invalid |
| D15C28 | No message (driver action, accelerator pedal, 0x714), receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15C29 | Message (driver action, accelerator pedal, 0x714) checksum error, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15C2A | Message (driver action, accelerator pedal, 0x714) out of date, receiver: ACC, transmitter: integrated chassis management (ICM) |
| D15C2B | ICM interface (driver action accelerator pedal, 0x714) signal invalid |
| D15C2C | Signal (driver action accelerator pedal, 0x714) undefined, transmitter: integrated chassis management (ICM) |
| D15C2D | ICM interface (driver action accelerator pedal, 0x714) signal invalid |
| D15C31 | ICM interface (driver action steering wheel, 0x713) signal invalid |
| D15C33 | ICM interface (driver action steering wheel, 0x713) signal invalid |
| D16503 | Signal fault (object data camera-based driver assistance systems (KAFAS) expanded, ID: OBJDT_KAFAS_EXT) transmitter: Camera-based driver assistance systems (KAFAS) - invalid |
| D16504 | Signal fault (object data camera-based driver assistance systems (KAFAS) expanded, ID: OBJDT_KAFAS_EXT) transmitter: Camera-based driver assistance systems (KAFAS) undefined |
| D16506 | Message fault (object data camera-based driver assistance systems (KAFAS), ID: OBJDT_KAFAS) transmitter: Camera-based driver assistance systems (KAFAS) - Timeout |
| D16509 | Signal fault (object data camera-based driver assistance systems (KAFAS), ID: OBJDT_KAFAS) transmitter: Camera-based driver assistance systems (KAFAS) invalid |
| D1650A | Signal fault (object data camera-based driver assistance systems (KAFAS), ID: OBJDT_KAFAS) transmitter: Camera-based driver assistance systems (KAFAS) undefined |
| D16512 | Message fault (object data camera-based driver assistance systems (KAFAS) expanded, ID: OBJDT_KAFAS_EXT) transmitter: Camera-based driver assistance systems (KAFAS) - Timeout |
| D16C1C | ICM interface (vehicle dynamics data, estimated, 0x18D) signal invalid |
| D16C1D | Signal (vehicle dynamics data, estimated, 0x18D) undefined, transmitter: integrated chassis management (ICM) |
| D16C57 | ICM interface (vehicle data S-CAN 1, 0x733) signal invalid |
| D16C6B | Signal (vehicle data S-CAN 1, 0x733) invalid, transmitter ICM |
| D16C6C | ICM interface (vehicle data S-CAN 2, 0x734) signal invalid |
| D16C6E | Signal (vehicle data S-CAN 2, 0x734) invalid, transmitter ICM |
| D16C6F | ICM interface (vehicle dynamics data, measured, 0x716) signal invalid |
| D16C70 | Signal (vehicle dynamics data, measured, 0x716) undefined, transmitter: integrated chassis management (ICM) |
| D16C71 | Signal (measured vehicle dynamics data, 0x716) invalid, transmitter ICM |
| D16C80 | ICM interface (status LDM, 0x702) signal invalid |
| D16C87 | ICM interface (steering angle, front axle, effective, 0x302): Signal invalid |
| D16C88 | Signal (effective front axle steering angle, 0x302) undefined: transmitter: integrated chassis management (ICM) |
| D16D64 | Signal (0x1535-0x0001, additional information, ambient temperature) invalid, transmitter BDC-ZGM |
| D16D83 | No message (0x9502-0x0001, drive, accelerator pedal), receiver ACC, transmitter BDC-ZGM |
| D16D84 | Message (0x9531-0x0001, drive, accelerator pedal) checksum incorrect, receiver ACC, transmitter BDC-ZGM |
| D16D85 | Signal (0x9502-0x0001, drive, accelerator pedal) invalid, transmitter BDC-ZGM |
| D1841F | SAS, FlexRay, line fault |
| D18420 | SAS, FlexRay, communication fault |
| D18426 | CAN instrument cluster message Combination: Time delay |
| D18487 | SAS, FlexRay, line fault |
| D19422 | Software unit: CAN message (from the ABS) missing |
| D19424 | Software unit: CAN message terminal status (from the DME) missing |
| D19428 | No message (ambient temperature, 252.1.4), receiver SAS, transmitter KOMBI |
| D1942A | Software unit: CAN message (from DME) missing |
| D1942C | Signal (ambient temperature, 252.1.4) invalid, transmitter KOMBI |
| D19450 | Signal (turn signal, 242.1.2) invalid, transmitter BDC-ZGM |
| D19476 | Signal (torque crankshaft 1, 40.1.4) invalid, transmitter EDME / DME/DDE |
| D194A6 | No message (parking button operation, 109.1.2), receiver SAS, transmitter BDC-ZGM |
| D194A7 | Signal fault (parking button operation, 99.0.4) invalid, transmitter BDC-ZGM |
| D194C2 | No message (vehicle yaw rate, 56.0.2), receiver SAS, transmitter DSC |
| D194C3 | Message (vehicle yaw rate, 56.0.2) checksum incorrect, receiver SAS, transmitter DSC |
| D194C4 | Message (vehicle yaw rate, 56.0.2) not current, receiver SAS, transmitter DSC |
| D194C8 | Signal (vehicle yaw rate, 56.0.2) invalid, transmitter DSC |
| D194D6 | No message (actual driver steering angle, 59.0.2), receiver SAS, transmitter DSC |
| D194D7 | Message (actual driver steering angle, 59.0.2) checksum error, receiver SAS, transmitter DSC |
| D194D8 | Message (actual driver steering angle, 59.0.2) not current, receiver SAS, transmitter DSC |
| D194E5 | Message (crankshaft torque 1, 40.1.4) incorrect checksum, receiver SAS, transmitter EDME / DME/DDE |
| D19513 | Message (crankshaft torque 1, 40.1.4) not up-to-date, receiver SAS, transmitter EDME / DME/DDE |
| D1951C | Signal (centre of gravity longitudinal acceleration, 55.0.2) invalid, transmitter KOMBI |
| D19542 | No message (centre of gravity lateral acceleration, 55.0.2), receiver SAS, transmitter DSC |
| D19543 | Message (centre of gravity lateral acceleration, 55.0.2) checksum error, receiver SAS, transmitter PMA |
DEFINISSEZ VOTRE MARQUE POUR ACCEDER A VOS CODES DEFAUTS
LES PRODUITS DISPONIBLES POUR VOTRE AUTO
-
Revue technique RTA
Revue Technique Automobile
La revue technique de référence depuis 1946. La RTA est une revue papier pour tous publics, qui vous permet d'effectuer les petites et les grosses réparations
Voir le descriptif
-
Entretien courant MTA
Méthode Technique Automobile
La MTA est issue de nos outils destinés aux pros de l'auto. Ces méthodes en ligne permettent d'effectuer les opérations de maintenances de votre auto (filtres, courroies, etc.)
Voir le descriptif
-
Toutes réparations MTAx
Méthode Technique Automobile Expert
La MTA expert est un outil en ligne destiné aux experts en mécanique et en carrosserie, pour effectuer tous types de réparations sur une voiture.
Voir le descriptif