Que signifie votre code Code Défaut BMW ?
Grace au système OBD, les
Bmw
fabriqués après 1996 sont normalement équipés d'une prise diagnostique OBD.
Si l'ordinateur de la voiture rencontre un problème,un code d'erreur ou un code de diagnostic (DTC)
sera stocké dans la mémoire de l'ECU de la voiture.
Avec un lecteur OBD branché sur le port OBD (On-Board Diagnostics) de la voiture, vous pouvez lire la liste des codes stockés, et donc découvrir quel est le problème.
Les codes suivent une formule permettant de savoir généralement quel est le problème avant même de regarder le tableau ci-dessous.
Nous vous présentons ci-dessus une liste très complète des différents codes défauts possibles.
Si le code défaut de votre auto s'affiche au tableau de bord, vous n'aurez peut-être même pas besoin d'un lecteur OBD . il sera dans la liste .
Réparer le code défaut de votre auto, c'est potentiellement simple à faire avec vos revues et méthodes techniques.
Réparer le code défaut de votre auto, c’est potentiellement simple à faire avec nos revues et méthodes techniques
| Code | Libellé |
|---|---|
| D19544 | Message (centre of gravity lateral acceleration, 55.0.2) not current, receiver SAS, transmitter DSC |
| D19548 | Signal (centre of gravity lateral acceleration, 55.0.2) invalid, transmitter DSC |
| D19552 | Signal (drive 1 wheel torque, 41.3.4) invalid, transmitter EDME / DME/DDE |
| D19557 | Message (wheel torque, electric motor 1, 41.3.4) missing, receiver SAS, transmitter EDME |
| D19558 | Message (wheel torque, electric motor 2, 41.3.4) missing, receiver SAS, transmitter EDME |
| D19559 | Message (wheel torque drive 2, 41.3.4) incorrect checksum, receiver SAS, transmitter EDME / DME/DDE |
| D1955A | Message (drive 2 wheel torque, 41.3.4) not up-to-date, receiver SAS, transmitter EDME / DME/DDE |
| D1955E | Signal (drive 2 wheel torque, 61.3.4) invalid, transmitter EDME / DME/DDE |
| D1956C | Signal (drive 3 wheel torque, 61.3.4) invalid, transmitter EDME / DME/DDE |
| D1956D | Message (wheel torque, electric motor 3, 61.3.4) missing, receiver SAS, transmitter EDME |
| D19571 | Message (wheel torque drive 4, 40.3.4) incorrect checksum, receiver SAS, transmitter EDME / DME/DDE |
| D19572 | Message (drive 4 wheel torque, 40.3.4) not up-to-date, receiver SAS, transmitter EDME / DME/DDE |
| D19577 | Signal (drive 4 wheel torque, 40.3.4) invalid, transmitter EDME / DME/DDE |
| D19584 | Signal (drive 5 wheel torque, 40.3.4) invalid, transmitter EDME / DME/DDE |
| D195A4 | Signal (trailer status 275.0.8) invalid, transmitter AHM |
| D19646 | No message (angle, accelerator pedal, 40.1.4), receiver SAS, transmitter DME/DDE |
| D19647 | Message (accelerator pedal angle, 40.1.4) incorrect checksum, receiver SAS, transmitter EDME / DME/DDE |
| D19648 | Message (accelerator pedal angle, 40.1.4) not up-to-date, receiver SAS, transmitter EDME / DME/DDE |
| D1964C | Signal (accelerator pedal angle, 40.1.4) invalid, transmitter EDME / DME/DDE |
| D19677 | Signal (drive 5 wheel torque, 40.3.4) invalid, transmitter EDME / DME/DDE |
| D1969D | Message (compensated wheel speed, 63.0.2) missing, receiver SAS, transmitter DSC |
| D196D7 | Message (compensated wheel speed, 63.0.2) checksum error, receiver SAS, transmitter DSC |
| D1973F | Message (compensated wheel speed, 63.0.2) not current, receiver SAS, transmitter DSC |
| D19744 | Message (drive train data 2, 230.0.2) missing, receiver SAS, transmitter EDME |
| D19745 | Message (data drive train 2, 230.0.2) incorrect checksum, receiver SAS, transmitter EDME / DME/DDE |
| D19746 | Message (drive train data 2, 230.0.2) not up-to-date, receiver SAS, transmitter EDME / DME/DDE |
| D1974D | Message (wheel torque drive 3, 61.3.4) incorrect checksum, receiver SAS, transmitter EDME / DME/DDE |
| D1974E | Message (drive 3 wheel torque, 61.3.4) not up-to-date, receiver SAS, transmitter EDME / DME/DDE |
| D19751 | Message (wheel torque drive 1, 41.3.4) incorrect checksum, receiver SAS, transmitter EDME / DME/DDE |
| D19752 | Message (drive 1 wheel torque, 41.3.4) not up-to-date, receiver SAS, transmitter EDME / DME/DDE |
| D19797 | Signal (compensated wheel speed, 63.0.2) invalid, transmitter DSC |
| D197C1 | No message (actual wheel speed, 46.0.1), receiver SAS, transmitter DSC |
| D197C2 | Message (actual wheel speed, 46.0.1) checksum error, receiver SAS, transmitter DSC |
| D197C3 | Message (actual wheel speed, 46.0.1) not current, receiver SAS, transmitter DSC |
| D197C5 | Signal (actual wheel speed, 46.0.1) invalid, transmitter DSC |
| D197C6 | Signal (actual wheel speed, 46.0.1) undefined, transmitter DSC |
| D197E7 | Signal (data, drive train 2, 0x3F9) invalid, transmitter EDME / DME/DDE |
| D197EE | Signal (compensated wheel speed, 63.0.2) invalid, transmitter DSC |
| D197F2 | Signal (drive 2 wheel torque, 41.3.4) invalid, receiver SAS, transmitter DME / DDE / EDME |
| D198AA | Signal (turn indicators, 0x1F6) invalid, transmitter BDC |
| D198AD | Signal (drive 3 wheel torque, 61.3.4) invalid, receiver SAS, transmitter DME / DDE / EDME |
| D199BF | Message (actual steering torque, driver, actuator, 49.0.2) missing, receiver SAS, transmitter EPS |
| D199C0 | Message (actual steering torque, driver, actuator, 49.0.2) checksum error, receiver SAS, transmitter EPS |
| D199C1 | Message (actual steering torque, driver, actuator, 49.0.2) not current, receiver SAS, transmitter EPS |
| D199C3 | Signal (actual steering torque, driver, actuator 49.0.2) invalid, transmitter EPS |
| D19A09 | Message (wheel torque drive 6, 61.3.4) incorrect checksum, receiver SAS, transmitter EDME / DME/DDE |
| D19A0A | Message (drive 6 wheel torque, 61.3.4) not up-to-date, receiver SAS, transmitter EDME / DME/DDE |
| D19A0C | Signal (drive 6 wheel torque, 61.3.4) invalid, transmitter EDME / DME/DDE |
| D19A3F | Signal (vehicle yaw rate, 56.0.2) invalid, transmitter DSC |
| D19A57 | Signal (centre of gravity longitudinal acceleration, 55.0.2) invalid, transmitter DSC |
| D19A62 | Signal (centre of gravity lateral acceleration, 55.0.2) invalid, transmitter DSC |
| D19ACB | Signal (status of trailer, 275.0.8) invalid, receiver SAS, transmitter AHM |
| D19ACC | Signal (drive 6 wheel torque, 61.3.4) invalid, receiver SAS, transmitter DME / DDE / EDME |
| D19B2C | No message (centre of gravity longitudinal acceleration, 55.0.2), receiver SAS, transmitter DSC |
| D19B2E | Message (centre of gravity longitudinal acceleration, 55.0.2) checksum error, receiver SAS, transmitter DSC |
| D19B2F | Message (centre of gravity longitudinal acceleration, 55.0.2) not current, receiver SAS, transmitter DSC |
| D19B3F | Message (wheel torque, electric motor 5, 40.3.4) missing, receiver SAS, transmitter EDME |
| D19B40 | Message (wheel torque drive 5, 40.3.4) incorrect checksum, receiver SAS, transmitter EDME / DME/DDE |
| D19B41 | Message (drive 5 wheel torque, 40.3.4) not up-to-date, receiver SAS, transmitter EDME / DME/DDE |
| D19CB4 | No message (wiper button operation, 258.2.4), receiver SAS, transmitter BDC-ZGM |
| D19E67 | Message (front area monitoring, camera, 117.3.4) checksum incorrect, receiver SAS, transmitter KAFAS |
| D19F09 | Invalid signal (wiper button operation, 258.2.4), transmitter BDC-ZGM |
| D1AC0D | Signal (drive train data 2, 230.0.2) undefined, transmitter EDME /DME/DDE |
| D1AD01 | Signal (accelerator pedal angle, 40.1.4) invalid, transmitter EDME / DME/DDE |
| D1AD06 | Signal (driver actual steering angle, 0x301) invalid, transmitter DSC |
| D1AD07 | Signal (actual steering torque, driver, actuator 49.0.2) invalid, transmitter EPS |
| D1AD24 | Signal (parking cross-guidance coordination, 0x1C3) invalid, transmitter PMA |
| D1AD27 | Message (status, DSC 2 stabilisation, 47.1.2) not current, receiver SAS, transmitter DSC |
| D1AD2B | Message (status, stabilisation, DSC 2, 47.1.2), receiver SAS, transmitter DSC |
| D1AD2E | Signal (DSC 2 stabilisation status, 47.1.2) invalid, transmitter DSC |
| D1AD31 | No message (front area monitoring camera, 117.3.4), receiver SAS, transmitter KAFAS |
| D1AD32 | Signal (front area monitoring camera, 96.1.2) invalid, transmitter KAFAS |
| D1AD33 | Message (front area monitoring camera, 117.3.4) not current, receiver SAS, transmitter KAFAS |
| D1AD34 | Signal (parking cross-guidance coordination, 95.1.2) invalid, transmitter PMA |
| D1AD3A | Signal (front area monitoring camera, 117.3.4) invalid, transmitter KAFAS |
| D1AD54 | Signal (torque crankshaft 1, 40.1.4) invalid, transmitter EDME / DME/DDE |
| D1AD58 | Signal (drive 1 wheel torque, 41.3.4) invalid, transmitter EDME / DME/DDE |
| D1AD86 | Message (0xD001-0x0001, environment model, front camera) missing, receiver SAS, transmitter camera-based driver assistance systems |
| D1AD87 | Message (0xD001-0x0001, environment model, front camera) incorrect checksum, receiver SAS, transmitter camera-based driver assistance systems |
| D1AD88 | Signal (0xD001-0x0001, environment model, front camera) invalid, transmitter camera-based driver assistance systems |
| D1AE18 | Message (0x303E-0x0001, driver assistance, radar data) checksum incorrect, receiver SAS, transmitter ACC |
| D20468 | Convertible Top Module (CVM), body CAN2: Communication fault |
| D21400 | No message (speed, 0x1A1), receiver: CVM, transmitter: integrated chassis management (ICM) |
| D21401 | No message (terminals, 0x12F), receiver: CVM, transmitter: Car access system (CAS) |
| D21403 | No message (control, power window FAT, 0xFA), receiver: CVM, transmitter: footwell module (FRM) |
| D21404 | No message (control, FH/SHD control unit, 0x26E), receiver: CVM, transmitter: Car access system (CAS) |
| D21405 | No message (central locking system and lid status, 0x2FC), receiver: CVM, transmitter: Car access system (CAS) |
| D21406 | No message (outside temperature, 0x2CA), receiver: CVM, transmitter: instrument cluster |
| D2441F | EARSV: FlexRay: Line fault |
| D24420 | EARSV: FlexRay: Communications fault |
| D24487 | EARSV: FlexRay: Starting fault |
| D28C01 | RSE: Failure of rear left screen |
| D28C02 | RSE: Failure of rear right screen |
| D30020 | Power window, passenger's door: System is not initialised |
| D3441F | DSC: FlexRay |
| D34420 | DSC: FlexRay |
| D34422 | DSC: FlexRay; communication fault |
| D3445F | ABS: CAN-bus fault |
| D34460 | ABS: CAN-bus transmission fault |
| D34461 | ABS: CAN-bus transmission fault |
DEFINISSEZ VOTRE MARQUE POUR ACCEDER A VOS CODES DEFAUTS
LES PRODUITS DISPONIBLES POUR VOTRE AUTO
-
Revue technique RTA
Revue Technique Automobile
La revue technique de référence depuis 1946. La RTA est une revue papier pour tous publics, qui vous permet d'effectuer les petites et les grosses réparations
Voir le descriptif
-
Entretien courant MTA
Méthode Technique Automobile
La MTA est issue de nos outils destinés aux pros de l'auto. Ces méthodes en ligne permettent d'effectuer les opérations de maintenances de votre auto (filtres, courroies, etc.)
Voir le descriptif
-
Toutes réparations MTAx
Méthode Technique Automobile Expert
La MTA expert est un outil en ligne destiné aux experts en mécanique et en carrosserie, pour effectuer tous types de réparations sur une voiture.
Voir le descriptif