Que signifie votre code Code Défaut BMW ?
Grace au système OBD, les
Bmw
fabriqués après 1996 sont normalement équipés d'une prise diagnostique OBD.
Si l'ordinateur de la voiture rencontre un problème,un code d'erreur ou un code de diagnostic (DTC)
sera stocké dans la mémoire de l'ECU de la voiture.
Avec un lecteur OBD branché sur le port OBD (On-Board Diagnostics) de la voiture, vous pouvez lire la liste des codes stockés, et donc découvrir quel est le problème.
Les codes suivent une formule permettant de savoir généralement quel est le problème avant même de regarder le tableau ci-dessous.
Nous vous présentons ci-dessus une liste très complète des différents codes défauts possibles.
Si le code défaut de votre auto s'affiche au tableau de bord, vous n'aurez peut-être même pas besoin d'un lecteur OBD . il sera dans la liste .
Réparer le code défaut de votre auto, c'est potentiellement simple à faire avec vos revues et méthodes techniques.
Réparer le code défaut de votre auto, c’est potentiellement simple à faire avec nos revues et méthodes techniques
| Code | Libellé |
|---|---|
| D34487 | DSC, FlexRay: Communications fault |
| D34B | F-CAN communication line |
| D354 | CAN-Bus no communication between the ESP control unit and the engine control unit |
| D3541B | No message (data, driving dynamics sensor extended, ID: 56.0.2), receiver: ABS, transmitter: integrated chassis management (ICM) |
| D3541C | Message (data, driving dynamics sensor extended, ID: 56.0.2) checksum error, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D3541D | Message (data, driving dynamics sensor extended, ID: 56.0.2) out of date, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35428 | Message (outdoor temperature, ID: 252.1.4) absent, receiver: ABS, transmitter: instrument cluster |
| D35429 | ABS: No CAN message (from DME) |
| D3542A | ABS: CAN message (from the DME) missing |
| D3542C | Interface: Signal (outdoor temperature, ID: 252.1.4) invalid, transmitter: instrument cluster |
| D3543B | Signal (data, one-lane model, driving dynamics, 66.0.2) undefined, transmitter: integrated chassis management (ICM) |
| D35444 | Message (wiper switch, ID: 132.1.2) absent, receiver: ABS, transmitter: Steering column switch (SZL) |
| D35446 | ABS: CAN message terminal status (from the DME) missing |
| D35448 | Interface: Signal (wiper switch, ID: 132.1.2) invalid, transmitter: Steering column switch (SZL) |
| D3544E | Interface: Signal (chassis number, ID: 275.7.8) invalid, transmitter: Car access system (CAS) |
| D35450 | Signal (turn signal, 242.1.2) invalid, transmitter BDC-ZGM |
| D35453 | ABS: No CAN message (from KOMBI) |
| D35458 | ABS: No CAN message (from DME) |
| D35459 | ABS: No CAN message (from DME) |
| D3545A | ABS: No CAN message (from DME) |
| D3545B | ABS: No CAN message (from DME) |
| D3545E | No message (services - condition-based service reset, ID: BOS_RUECKSTELLUNG) missing, receiver: ABS, transmitter: instrument cluster |
| D35467 | Signal (services - condition-based service reset, ID: BOS_RUECKSTELLUNG) undefined: transmitter: instrument cluster |
| D35468 | ABS: CAN message for yaw rate sensor errored |
| D35469 | ABS: CAN message for yaw rate sensor errored |
| D3546E | No message (services - condition-based service reset 2, ID: BOS_RUECKSTELLUNG_2) receiver: ABS, transmitter: instrument cluster |
| D3546F | Instrument cluster interface (Service, reset 2): Signal invalid |
| D35470 | Signal (services - condition-based service reset 2, ID: BOS_RUECKSTELLUNG_2) undefined: transmitter: instrument cluster |
| D35473 | No message (actual steering angle, front axle, 57.1.2), receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35476 | Instrument cluster interface (engine crankshaft torque 1): Signal invalid |
| D35477 | ICM interface (actual steering angle, front axle, 57.1.2): Signal invalid |
| D3547C | ICM interface (actual steering angle, front axle, 57.1.2): Signal invalid |
| D35482 | Message (chassis number, ID: 275.7.8) absent, receiver: ABS, transmitter: Car access system |
| D35494 | No message (vehicle type, 275.5.8), receiver: ABS, transmitter: Car access system (CAS) |
| D35498 | Interface car access system (CAS) (vehicle type, 275.5.8): Signal invalid |
| D35499 | Signal (vehicle type, 275.5.8) undefined, transmitter: Car access system (CAS) |
| D3549C | Interface: Signal (Klemmen, ID: 0X12F) invalid, transmitter: Car access system (CAS) / FEM |
| D354B6 | Airbag interface (seatbelt contact status, seat occupancy, 275.6.8): Signal invalid |
| D354B7 | Airbag signal (seatbelt contact status, seat occupancy) undefined |
| D354B8 | Message (vehicle speed ID: 55.3.4) absent, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D354B9 | Message (vehicle speed ID: 55.3.4) checksum error, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D354BA | Message (vehicle speed ID: 55.3.4) out of date, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D354BE | Integrated chassis management (ICM) interface: Signal (vehicle speed ID: 55.3.4) invalid |
| D354BF | Signal (roadspeed, vehicle, 55.3.4) undefined, transmitter: integrated chassis management (ICM) |
| D354C2 | Message (vehicle yaw rate, 56.0.2) absent, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D354C3 | Message (vehicle yaw rate, 56.0.2) checksum error, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D354C4 | Message (vehicle yaw rate, 56.0.2) out of date, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D354C8 | Integrated chassis management (ICM) interface: Signal (vehicle yaw rate ID: 56.0.2) invalid |
| D354C9 | Signal (yaw rate, vehicle, ID: 0X19F) undefined: transmitter: integrated chassis management (ICM) |
| D354D6 | No message (actual steering angle, driver, ID: 0X301), receiver: ABS, transmitter: integrated chassis management (ICM), SZL |
| D354D7 | Message (actual steering angle, driver, ID: 0X301) checksum error, receiver: ABS, transmitter: integrated chassis management (ICM)/SZL |
| D354D8 | Message (actual steering angle, driver, ID: 0X301) out of date, receiver: ABS, transmitter: integrated chassis management (ICM), SZL |
| D354E8 | Message (actual steering angle, front axle, ID: 57.1.2), receiver: ABS, transmitter: integrated chassis management (ICM) |
| D354E9 | Message (actual steering angle, front axle, ID: 57.1.2) checksum error, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D354EA | Message (actual steering angle, front axle, ID: 57.1.2) out of date, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D354EE | Integrated chassis management (ICM) interface: Signal (actual front axle steering angle, ID: 57.1.2) invalid |
| D354EF | Signal (actual steering angle, front axle, ID: 57.1.2) undefined: transmitter: integrated chassis management (ICM) |
| D354F2 | Message (kilometer reading/kilometer range, ID: 276.4.8) absent: receiver: ABS, transmitter: instrument cluster |
| D354F6 | Instrument cluster interface: Signal (kilometer reading/kilometer range, ID: 276.4.8) invalid |
| D354F8 | Message (terminals, ID: 116.0.2) absent, receiver: ABS, transmitter: Car access system (CAS) |
| D354F9 | Message (terminals, ID: 116.0.2) checksum error, receiver: ABS, transmitter: Car access system (CAS) |
| D354FA | Message (terminals, ID: 116.0.2) out of date, receiver: ABS, transmitter: Car access system (CAS) |
| D354FC | Car access system (CAS) interface: Signal (terminals, ID: 116.0.2) invalid |
| D354FD | Signal (terminals, ID: 0X12F) undefined: transmitter: Car access system (CAS) / FEM |
| D355 | CAN-Bus no communication between the ESP control unit and the engine control unit |
| D3550A | Message (driving dynamics configuration switch, ID: 272.4.8) absent, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D3550B | Message (configuration, switch, driving dynamics, 272.4.8) checksum incorrect, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D3550C | Message (configuration, switch, driving dynamics, 272.4.8) out of date, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35510 | Integrated chassis management (ICM) interface: Signal (driving dynamics configuration switch, ID: 272.4.8) invalid |
| D35511 | Signal (configuration, switch, driving dynamics, ID: 0X3A7) undefined: transmitter: integrated chassis management (ICM) |
| D3551A | Instrument cluster interface (LCD brightness control, ID: 252.3.4): Signal invalid |
| D3551C | Integrated chassis management (ICM) interface: Signal (centre of gravity longitudinal acceleration, ID: 55.0.2) invalid |
| D3551D | Signal (longitudinal acceleration, centre of gravity, ID: 0X199) undefined: transmitter: integrated chassis management (ICM) |
| D35538 | Message (roadway inclination, ID: 56.1.2) absent, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35539 | Message (roadway inclination, ID: 56.1.2) checksum error, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D3553A | Message (roadway inclination, ID: 56.1.2) out of date, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D3553E | Integrated chassis management (ICM) interface: Signal (roadway inclination, ID: 56.1.2) invalid |
| D35542 | Message (lateral acceleration centre of gravity, ID: 55.0.2) absent, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35543 | Message (lateral acceleration centre of gravity, ID: 55.0.2) checksum error, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35544 | Message (lateral acceleration centre of gravity, ID: 55.0.2) out of date, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35548 | Integrated chassis management (ICM) interface: Signal (lateral acceleration centre of gravity, ID: 55.0.2) invalid |
| D35586 | Message (rain sensor-wiper speed, ID:256.1.4) absent, receiver: ABS, transmitter: junction box electronic (JBE) |
| D3558A | Junction box electronic (JBE) interface: Signal (rain sensor-wiper speed, ID: 256.1.4) invalid |
| D3558B | Signal (rain sensor-wiper speed, 256.1.4) undefined, transmitter: junction box electronics (JBE) |
| D3558C | Message (relative time, ID: 276.2.8) absent, receiver: ABS, transmitter: instrument cluster |
| D35590 | Instrument cluster interface: Signal (relative time, ID: 276.2.8) invalid |
| D3559C | Integrated chassis management (ICM) interface (setpoint, share, control, steering, 39.1.2): Signal invalid |
| D355A0 | Message (trailer status, ID: 275.0.8) absent, receiver: ABS, transmitter: trailer module (AHM) |
| D355A4 | Trailer module (AHM) interface: Signal (trailer status, ID: 275.0.8) invalid |
| D355A5 | Signal (status, trailer, 275.0.8) undefined, transmitter: trailer module (AHM) |
| D355A6 | Message (dynamic drive (ARS) status, ID: 35.3.4) absent, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D355AA | Integrated chassis management (ICM) interface: Signal (dynamic drive (ARS) status, ID: 35.3.4) invalid |
| D355AC | Message (dynamic brake control operating element status, ID: 98.0.2) absent, receiver: ABS, transmitter: footwell module (FRM) |
| D355B0 | Footwell module (FRM) interface: Signal (dynamic brake control operating element status, ID: 98.0.2) invalid |
| D355B4 | No message (status, control element, HDC, ID: 0X320), receiver: ABS, transmitter: integrated chassis management (ICM) |
| D355CA | Message (rear axle steering status, ID: 50.0.2) absent, receiver: ABS, transmitter: rear axle wheels inclination control module (HSR) |
| D355CB | Message (rear axle steering status, ID: 50.0.2) checksum error, receiver: ABS, transmitter: rear axle wheels inclination control module (HSR) |
| D355CC | Message (rear axle steering status, ID: 50.0.2) out of date, receiver: ABS, transmitter: rear axle wheels inclination control module (HSR) |
| D355D0 | Rear axle wheels inclination control module (HSR) interface: Signal (rear axle steering status, ID: 50.0.2) invalid |
| D355E2 | Message (parking brake status, ID: 101.0.2) absent, receiver: ABS, transmitter: parking brake |
DEFINISSEZ VOTRE MARQUE POUR ACCEDER A VOS CODES DEFAUTS
LES PRODUITS DISPONIBLES POUR VOTRE AUTO
-
Revue technique RTA
Revue Technique Automobile
La revue technique de référence depuis 1946. La RTA est une revue papier pour tous publics, qui vous permet d'effectuer les petites et les grosses réparations
Voir le descriptif
-
Entretien courant MTA
Méthode Technique Automobile
La MTA est issue de nos outils destinés aux pros de l'auto. Ces méthodes en ligne permettent d'effectuer les opérations de maintenances de votre auto (filtres, courroies, etc.)
Voir le descriptif
-
Toutes réparations MTAx
Méthode Technique Automobile Expert
La MTA expert est un outil en ligne destiné aux experts en mécanique et en carrosserie, pour effectuer tous types de réparations sur une voiture.
Voir le descriptif