Que signifie votre code Code Défaut BMW ?
Grace au système OBD, les
Bmw
fabriqués après 1996 sont normalement équipés d'une prise diagnostique OBD.
Si l'ordinateur de la voiture rencontre un problème,un code d'erreur ou un code de diagnostic (DTC)
sera stocké dans la mémoire de l'ECU de la voiture.
Avec un lecteur OBD branché sur le port OBD (On-Board Diagnostics) de la voiture, vous pouvez lire la liste des codes stockés, et donc découvrir quel est le problème.
Les codes suivent une formule permettant de savoir généralement quel est le problème avant même de regarder le tableau ci-dessous.
Nous vous présentons ci-dessus une liste très complète des différents codes défauts possibles.
Si le code défaut de votre auto s'affiche au tableau de bord, vous n'aurez peut-être même pas besoin d'un lecteur OBD . il sera dans la liste .
Réparer le code défaut de votre auto, c'est potentiellement simple à faire avec vos revues et méthodes techniques.
Réparer le code défaut de votre auto, c’est potentiellement simple à faire avec nos revues et méthodes techniques
| Code | Libellé |
|---|---|
| D355E3 | Message (parking brake status, ID: 101.0.2) checksum error, receiver: ABS, transmitter: parking brake |
| D355E4 | Message (parking brake status, ID: 101.0.2) out of date, receiver: ABS, transmitter: parking brake |
| D355E6 | Parking brake interface: Signal (parking brake status, ID: 101.0.2) invalid |
| D355E7 | Signal (status, parking brake, 101.0.2) undefined, transmitter: EMF |
| D355EA | Message (vehicle estimated memorized dynamic data, ID: 54.1.4) absent, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D355EB | Message (vehicle estimated memorized dynamic data, ID: 54.1.4) checksum error, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D355EC | Message (vehicle estimated memorized dynamic data, ID: 54.1.4) out of date, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D355F0 | Integrated chassis management (ICM) interface: Signal (vehicle estimated memorized dynamic data, ID: 54.1.4) invalid |
| D355F8 | Transfer case interface: Signal (xDrive actuator information, ID: 19.3.4) invalid |
| D355F9 | Signal (xDrive actuator information, 19.3.4) undefiniert: Sender LMV |
| D356 | CAN-Bus no communication between the ESP control unit and the engine control unit |
| D35646 | Message (accelerator pedal angle, ID: 40.1.4) absent, receiver: ABS, transmitter: Engine |
| D35647 | Message (accelerator pedal angle, ID: 40.1.4) checksum error, receiver: ABS, transmitter: Engine |
| D35648 | Message (accelerator pedal angle, ID: 40.1.4) out of date, receiver: ABS, transmitter: Engine |
| D3564C | Engine interface: Signal (accelerator pedal angle, ID: 40.1.4) invalid |
| D3564D | Signal (accelerator pedal angle, ID: 0X0D9) undefined: transmitter: Engine |
| D35652 | No message (central locking and lid status, 116.1.2), receiver: ABS, transmitter: Car access system (CAS) |
| D35656 | Interface car access system (CAS) (ZV (central locking) and lid status, 116.1.2): Signal invalid |
| D35657 | Signal (ZV (central locking) and lid status, 116.1.2) undefined, transmitter: Car access system (CAS) |
| D35672 | Integrated chassis management (ICM) interface: Signal invalid |
| D3567A | Interface EMF (status, parking brake, 101.0.2): signal invalid |
| D3567D | Message (board network BN2020 unit, 252.0.4) absent, receiver: ABS, transmitter: instrument cluster |
| D35694 | Message (tyre pressure control data packet 1, 229.0.1) absent, receiver: ABS, transmitter: Car access system (CAS) |
| D35695 | Message (tyre pressure control data packet 2, 229.0.1) absent, receiver: ABS, transmitter: Car access system (CAS) |
| D35698 | No message (torque request, operating strategy, 74.3.4), receiver DSC, transmitter EDME |
| D356A1 | Message (request, difference, braking torque, yaw moment distribution, ID: 66.1.2) out of date, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D356A2 | Message (request, difference, braking torque, yaw moment distribution, ID: 66.1.2) checksum error, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D356D4 | No message (data, single track model, driving dynamics, ID: 66.0.2), receiver: ABS, transmitter: integrated chassis management (ICM) |
| D356D5 | Message (data, single track model, driving dynamics, ID: 66.0.2) out of date, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D356D8 | Message (data, single track model, driving dynamics, ID: 66.0.2) checksum error, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D356E4 | No message (status, longitudinal moment distribution, front axle, rear axle, ID: 19.3.4), receiver: ABS, transmitter: transfer car access system (CAS)e (LVM) |
| D356E5 | Message (status, longitudinal moment distribution, front axle, rear axle, ID: 19.3.4) checksum error, receiver: ABS, transmitter: transfer car access system (CAS)e (LVM) |
| D356E6 | Message (status, longitudinal moment distribution, front axle, rear axle, ID: 19.3.4) out of date, receiver: ABS, transmitter: transfer car access system (CAS)e (LVM) |
| D35720 | Message (tyre pressure control data packet 1, 229.0.1) out of date, receiver: ABS, transmitter: Car access system (CAS) |
| D35721 | Message (tyre pressure control data packet 2, 229.0.1) out of date, receiver: ABS, transmitter: Car access system (CAS) |
| D35774 | ABS interface: Signal (rear axle transverse moment target, 67.0.2) invalid |
| D35777 | Car access system (CAS) interface: Signal (tyre pressure control data packet 1, 229.0.1) invalid |
| D35778 | Car access system (CAS) interface: Signal (tyre pressure control data packet 2, 229.0.1) invalid |
| D3577B | Signal (operational strategy torque request, 74.3.4) invalid, transmitter DME / DDE / EDME |
| D35780 | Interface: Signal (drivetrain data, ID: 237.1.2) invalid, transmitter: Engine |
| D357CA | Signal (operational strategy torque request, 74.3.4) invalid, transmitter DME / DDE / EDME |
| D357CC | Signal (electric motor start power status, 117.1.2) invalid, transmitter DME / DDE / EDME |
| D357E7 | Signal (data, drive train 2, 230.0.2) invalid, transmitter DME / DDE / EDME |
| D357EA | No message (LCD brightness control, ID: 252.3.4) receiver: ABS, transmitter: instrument cluster |
| D357F2 | Signal (powertrain 2 wheel torque, 41.3.4) invalid, transmitter DME / DDE / EDME |
| D358 | CAN-Bus, missing message from the instrument cluster control unit |
| D3582B | Signal (electric motor start power status, 117.1.2) undefined, transmitter DME / DDE / EDME |
| D3583C | Signal (drivetrain data, ID: 237.1.2) undefined: Transmitter DME/DDE |
| D358AD | Signal (powertrain 3 wheel torque, 61.3.4) invalid, transmitter DME / DDE / EDME |
| D358F9 | Signal (status, longitudinal moment distribution, front axle, rear axle, ID: 19.3.4) undefined: transmitter: transfer car access system (CAS)e (LVM) |
| D35932 | Message (time/date, ID: 276.6.8) absent, receiver: ABS, transmitter: instrument cluster |
| D35936 | Instrument cluster interface: Signal (time/date, ID: 276.6.8) invalid |
| D35937 | Signal (time/date, ID: 276.6.8) undefined: transmitter: instrument cluster |
| D3593C | Message (specification for passive damper share, ID: 72.1.2) absent, receiver: ABS, transmitter: vertical dynamic management (VDM) |
| D3593E | Message (specification for passive damper share, ID: 72.1.2) out of date, receiver: ABS, transmitter: vertical dynamic management (VDM) |
| D35940 | Vertical dynamic management (VDM) interface: Signal (specification for passive damper share, ID: 72.1.2) invalid |
| D35941 | Signal (specification for passive damper share, ID: 72.1.1) undefined: transmitter: vertical dynamic management (VDM) |
| D35948 | Integrated chassis management (ICM) interface: Signal (I-Brake/hill descent control parameterization input, ID: 60.1.4) invalid |
| D359BF | Message (actual steering torque, driver, actuator, 49.0.2) missing, receiver DSC, transmitter EPS |
| D359C0 | Message (actual steering torque, driver, actuator, 49.0.2) checksum error, receiver DSC, transmitter EPS |
| D359C1 | Message (actual steering torque, driver, actuator, 49.0.2) not current, receiver DSC, transmitter EPS |
| D359C3 | Signal (actual steering torque, driver, actuator 49.0.2) invalid, transmitter EPS |
| D359FC | Message fault (wheel load, 72.0.2), DSC receiver, ICM transmitter |
| D359FD | Message (Wheel load, 72.0.2) checksum error, receiver: ABS (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| D359FE | Message (Wheel load, 72.0.2) out of date, receiver: ABS (FlexRay), transmitter: integrated chassis management (ICM) (FlexRay) |
| D35A | PT-CAN, Message exterior temperature, 0x2CA): Absent |
| D35A00 | Integrated chassis management (ICM) interface (wheel load, 72.0.2): Signal invalid |
| D35A01 | Signal (Wheel load, 72.0.2) undefined, transmitter: integrated chassis management (ICM) |
| D35A0D | Signal (wheel torque engine 6, ID: 61.3.4) undefined: dME/DDE transmitter |
| D35A3F | Interface ICM (yaw velocity, vehicle, 56.0.2): signal invalid |
| D35A53 | Interface: Signal (first steering angle front axle, ID: 57.1.2) invalid, transmitter: integrated chassis management (ICM) / EPS |
| D35A57 | ICM interface (longitudinal acceleration, centre of gravity, ID: 0X199) Signal invalid |
| D35A62 | Interface: Signal (lateral acceleration centre of gravity, ID: 0X19A) invalid, transmitter: Integrated chassis management (ICM) / EPS |
| D35A64 | Integrated chassis management (ICM) interface (Rad Last, 72.0.2): Signal invalid |
| D35ACC | Signal (powertrain 6 wheel torque, 61.3.4) invalid, transmitter DME / DDE / EDME |
| D35B | Lateral acceleration sensor |
| D35B | Yaw rate sensor malfunction |
| D35B00 | Message (hydraulic function request, ID: 100.1.2) absent, receiver: ABS, transmitter: parking brake |
| D35B01 | Message (hydraulic function request, ID: 100.1.2) checksum error, receiver: ABS, transmitter: parking brake |
| D35B02 | Message (hydraulic function request, ID: 100.1.2) out of date, receiver: ABS, transmitter: parking brake |
| D35B03 | EMF interface (request, hydraulic function, 100.1.2): Signal invalid |
| D35B04 | Parking brake interface: Signal (hydraulic function request, ID: 100.1.2) invalid |
| D35B05 | Signal (request for hydraulic function, ID: 0X260) undefined: EMF transmitter |
| D35B21 | Message (OBD diagnosis, engine electrical control, ID: 243.0.2) absent, receiver: ABS, transmitter: Electrical machine electronics (EME) |
| D35B23 | Signal (OBD diagnosis, engine management, electrical, 243.0.2) undefined, transmitter: Electrical machine elctronics (EME) |
| D35B2C | Message (centre of gravity longitudinal acceleration, ID: 55.0.2) absent, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35B2E | Message (centre of gravity longitudinal acceleration, ID: 55.0.2) checksum error, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35B2F | Message (centre of gravity longitudinal acceleration, ID: 55.0.2) out of date, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35B30 | Message (steering angle offset, ID: 108.0.2) absent, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35B31 | Message (steering angle offset, ID: 108.0.2) checksum error, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35B32 | Message (steering angle offset, ID: 108.0.2) out of date, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35B34 | Integrated chassis management (ICM) interface: Signal (steering angle offset, ID: 108.0.2) invalid |
| D35B35 | Signal (steering-angle offset, 108.0.2) undefined, transmitter: integrated chassis management (ICM) |
| D35C09 | Message fault (vehicle dynamics data estimated, 54.1.4) absent, receiver: ABS, transmitter: integrated chassis management (ICM) |
| D35C0B | No message (ride-height levels EHC, 256.2.4), receiver: ABS, transmitter: EHC |
| D35C1D | Message (status of parking brake contact, ID: 0X34F) missing, receiver: ABS, transmitter: FEM |
| D35C34 | Message (ride-height levels EHC, 256.2.4) checksum error, receiver: ABS, transmitter: EHC |
| D35C35 | Message (ride-height levels EHC, 256.2.4) out of date, receiver: ABS, transmitter: EHC |
| D35C6E | Message (Night Vision front area monitoring, 261.0.4) missing, receiver DSC, transmitter camera-based driver assistance systems |
| D35CA5 | No message (rear spoiler status BN2020, 259.1.2), receiver DSC, transmitter HKFM |
DEFINISSEZ VOTRE MARQUE POUR ACCEDER A VOS CODES DEFAUTS
LES PRODUITS DISPONIBLES POUR VOTRE AUTO
-
Revue technique RTA
Revue Technique Automobile
La revue technique de référence depuis 1946. La RTA est une revue papier pour tous publics, qui vous permet d'effectuer les petites et les grosses réparations
Voir le descriptif
-
Entretien courant MTA
Méthode Technique Automobile
La MTA est issue de nos outils destinés aux pros de l'auto. Ces méthodes en ligne permettent d'effectuer les opérations de maintenances de votre auto (filtres, courroies, etc.)
Voir le descriptif
-
Toutes réparations MTAx
Méthode Technique Automobile Expert
La MTA expert est un outil en ligne destiné aux experts en mécanique et en carrosserie, pour effectuer tous types de réparations sur une voiture.
Voir le descriptif