Que signifie votre code Code Défaut BMW ?
Grace au système OBD, les
Bmw
fabriqués après 1996 sont normalement équipés d'une prise diagnostique OBD.
Si l'ordinateur de la voiture rencontre un problème,un code d'erreur ou un code de diagnostic (DTC)
sera stocké dans la mémoire de l'ECU de la voiture.
Avec un lecteur OBD branché sur le port OBD (On-Board Diagnostics) de la voiture, vous pouvez lire la liste des codes stockés, et donc découvrir quel est le problème.
Les codes suivent une formule permettant de savoir généralement quel est le problème avant même de regarder le tableau ci-dessous.
Nous vous présentons ci-dessus une liste très complète des différents codes défauts possibles.
Si le code défaut de votre auto s'affiche au tableau de bord, vous n'aurez peut-être même pas besoin d'un lecteur OBD . il sera dans la liste .
Réparer le code défaut de votre auto, c'est potentiellement simple à faire avec vos revues et méthodes techniques.
Réparer le code défaut de votre auto, c’est potentiellement simple à faire avec nos revues et méthodes techniques
| Code | Libellé |
|---|---|
| D35CB4 | No message (wiper switch operation, 258.2.4), receiver DSC, transmitter BDC-ZGM |
| D35CBA | Message fault (electrical parking brake switch fault - DSC-LIN, 0x2B) missing, receiver DSC, transmitter DSC |
| D35CCA | Message (electrical parking brake switch fault - DSC-LIN, 0x1) missing, receiver DSC, transmitter DSC |
| D35CD7 | No message (front area monitoring radar 1, 98.2.4), receiver DSC, transmitter SAS |
| D35CD8 | No message (front area monitoring camera 2, 117.3.4), receiver DSC, transmitter KAFAS |
| D35D1C | Message (rear spoiler status BN2020, 259.1.2) not current, receiver DSC, transmitter HKFM |
| D35D25 | Message (electrical parking brake switch fault - DSC-LIN, 0x1) not current, receiver DSC, transmitter DSC |
| D35D34 | Message (front area monitoring radar 2, 98.2.4) not current, receiver DSC, transmitter SAS |
| D35D40 | Message (front area monitoring radar 1, 98.2.4) not current, receiver DSC, transmitter SAS |
| D35D43 | Message fault (electrical parking brake switch fault - DSC-LIN, 0x2B) not current, receiver DSC, transmitter DSC |
| D35D44 | Message (front area monitoring camera 2, 117.3.4) not current, receiver DSC, transmitter KAFAS |
| D35DC7 | Signal (electric parking brake switch fault - DSC-LIN, 0x1) invalid, transmitter DSC |
| D35DC8 | Signal (front area monitoring radar 2, 98.2.4) invalid, transmitter SAS |
| D35DE0 | Signal (front area monitoring camera 2, 117.3.4) invalid, transmitter KAFAS |
| D35DE2 | Signal (front area monitoring radar 1, 98.2.4) invalid, transmitter SAS |
| D35E52 | Message (target change drive vector Parking Manoeuvring Assistant, 30.1.2) checksum incorrect, receiver DSC, transmitter Parking Manoeuvring Assistant |
| D35E5C | Message fault (electrical parking brake switch fault - DSC-LIN, 0x2B) checksum error, receiver DSC, transmitter DSC |
| D35E67 | Message (front area monitoring camera, 117.3.4) checksum error, receiver DSC, transmitter KAFAS |
| D35E68 | Message (electrical parking brake switch fault - DSC-LIN, 0x1) checksum error, receiver DSC, transmitter DSC |
| D35E6A | Message (trailer status, 275.0.8) checksum error, receiver DSC, transmitter AHM |
| D35E73 | No message (front area monitoring radar 2, 98.2.4), receiver DSC, transmitter SAS |
| D35F03 | Signal (rear spoiler status BN2020, 259.1.2) invalid, transmitter HKFM |
| D35F09 | Invalid signal (wiper button operation, 258.2.4), transmitter BDC-ZGM |
| D35F7D | Message (rear spoiler status BN2020, 259.1.2) checksum error, receiver DSC, transmitter HKFM |
| D35F8B | Message (front area monitoring radar 2, 98.2.4) checksum error, receiver DSC, transmitter SAS |
| D35F8C | Message (front area monitoring radar 1, 98.2.4) checksum error, receiver DSC, transmitter SAS |
| D35F8D | Message (front area monitoring camera 2, 117.3.4) checksum error, receiver DSC, transmitter KAFAS |
| D36500 | Message (xDrive actuator information, ID: 19.3.4) absent, receiver: ABS, transmitter: transfer case |
| D36501 | Message (xDrive actuator information, ID: 19.3.4) checksum error, receiver: ABS, transmitter: transfer case |
| D36502 | Message (xDrive actuator information, ID: 19.3.4) out of date, receiver: ABS, transmitter: transfer case |
| D36505 | Signal (xDrive actuator information, 19.3.4) invalid, transmitter VTG |
| D36C05 | Signal (ambient temperature, ID: 0X2CA) undefined: transmitter: Instrument cluster |
| D36C09 | Signal (operation of wiper button, ID: 0X2A6) undefined: transmitter: Steering column switch (SZL) |
| D36C0D | Signal (data drive train 2, ID: 0X3F9) undefined: dME/DDE transmitter |
| D36C19 | Signal (crankshaft torque 1, ID: 0X0A5) undefined: dME/DDE transmitter |
| D36C1A | Signal (vehicle identification number, 275.7.8) undefined, transmitter: Car access system (CAS) |
| D36C22 | Interface EHC (ride heights, EHC, 256.2.4): Signal invalid |
| D36C23 | Signal (ride heights, EHC, 256.2.4) undefined, transmitter: EHC |
| D36C3B | Signal (wheel torque engine 3, ID: 0X145) undefined: dME/DDE transmitter |
| D36C81 | Footwell module (FRM) interface: Signal (memorized door sensors status, ID: 256.3.4) invalid |
| D36C84 | ICM interface (data, driving dynamics sensor, extended, 56.0.2): Signal invalid |
| D36C85 | Signal (data, driving dynamic sensor, extended,56.0.2) undefined, transmitter: integrated chassis management (ICM) |
| D36C86 | ICM interface (data, driving dynamics sensor, extended, 56.0.2): Signal invalid |
| D36C8C | EMF interface (request hydraulic function, ID: 0X260) Signal invalid |
| D36D01 | Signal (accelerator pedal angle, 40.1.4) invalid, transmitter DME / DDE / EDME |
| D36D07 | Signal (actual steering torque, driver, actuator 49.0.2) invalid, transmitter EPS |
| D36D31 | No message (front area monitoring camera, 117.3.4), receiver DSC, transmitter KAFAS |
| D36D32 | Signal (front area monitoring camera, 96.1.2) invalid, transmitter KAFAS |
| D36D33 | Message (front area monitoring camera, 117.3.4) not current, receiver DSC, transmitter KAFAS |
| D36D3A | Signal (front area monitoring camera, 117.3.4) invalid, transmitter KAFAS |
| D36D58 | Signal (powertrain 1 wheel torque, 41.3.4) invalid, transmitter DME / DDE / EDME |
| D373 | CAN-Bus no communication with the steering column switch |
| D38402 | Communication fault: PT-CAN |
| D3840A | EMF, PT-CAN: Communication fault |
| D39418 | Message (Status door sensors secured, ID: STAT_DS_VRFD) absent, transmitter: footwell module (FRM) fA |
| D39419 | Message (Status door sensors secured, ID: STAT_DS_VRFD) checksum error, transmitter: footwell module (FRM) fA |
| D3941A | Message (Status door sensors secured, ID: STAT_DS_VRFD) out of date, transmitter: footwell module (FRM) fA |
| D39428 | Message (exterior temperature, 2CA) absent, receiver: EMF, transmitter: instrument cluster |
| D3942C | Interface instrument cluster (exterior temperature, 2CA): Signal invalid |
| D39445 | Message (Status seat-belt contact seat occupancy, 297) checksum error, receiver: EMF, transmitter: Airbag |
| D3944E | Interface car access system (CAS) (chassis number, 380): Signal invalid |
| D39482 | Message (chassis number, 380) absent, receiver: EMF, transmitter: Car access system (CAS) |
| D39485 | Signal (vehicle identification number 0x380) invalid: Car access system (CAS) transmitter |
| D394B6 | Interface airbag (status seat-belt contact seat occupancy, 297): Signal invalid |
| D394B8 | No message (vehicle speed, 1A1), receiver: parking brake (EMF), transmitter: interface chassis management (ICM) |
| D394B9 | Checksum incorrect (vehicle speed, 1A1), receiver: parking brake (EMF), transmitter: interface chassis management (ICM) |
| D394BA | Message (vehicle speed, 1A1) out of date, receiver: parking brake (EMF), transmitter: interface chassis management (ICM) |
| D394BB | Signal (vehicle speed, 0x1A1) undefined: ICM transmitter |
| D394BE | Interface chassis management (ICM) (vehicle speed, 1A1): Signal invalid |
| D394BF | Signal (vehicle speed, 1A1) undefined: Interface Chassis Management (ICM) transmitter |
| D394F2 | Message (mileage/range, 330) absent, receiver: EMF, transmitter: instrument cluster |
| D394F5 | Signal (kilometre reading / range, 0x330) undefined: Instrument cluster transmitter |
| D394F6 | Interface instrument cluster (mileage/range, 330): Signal invalid |
| D394F8 | Message (terminals, 12F) absent, receiver: EMF, transmitter: Car access system (CAS) |
| D394F9 | Message (terminals, 12F) checksum error, receiver: EMF, transmitter: Car access system (CAS) |
| D394FA | Message (terminals, 12F) out of date, receiver: EMF, transmitter: Car access system (CAS) |
| D394FB | Signal (terminals, 0x12F) undefined: Car access system (CAS) transmitter |
| D394FC | Interface car access system (CAS) (terminals, 12F): Signal invalid |
| D394FD | Signal (terminals, 12F) undefined: Transmitter car access system (CAS) |
| D39512 | Interface instrument cluster (LCD brightness control, 0x393): Signal invalid |
| D3951A | Interface instrument cluster (LCD brightness control, 393): Signal invalid |
| D3951C | Interface (longitudinal acceleration, centre of gravity, 0x199), signal invalid |
| D3951D | Signal (longitudinal acceleration, centre of gravity, 0x199) undefined, transmitter: Interface Chassis Management (ICM) |
| D39528 | Message (vehicle mass/weight, 108.1.2) missing, receiver: parking brake (EMF), transmitter: interface chassis management (ICM) |
| D39529 | Message (vehicle mass/weight, 108.1.2) checksum error, receiver: parking brake (EMF), transmitter: interface chassis management (ICM) |
| D3952E | ICM interface (mass/weight of vehicle, 108.1.2): Signal invalid |
| D3953E | Integrated chassis management (ICM) interface (inclining road, 163): Signal invalid |
| D39553 | Signal (engine torque 1, 8F) undefiniert: Sender DME / DDE |
| D39570 | No message (4 wheel drive torque), receiver: parking brake (EMF), transmitter: Engine (DME/DDE) |
| D39571 | Checksum error (4 wheel drive torque), receiver: parking brake (EMF), transmitter: Engine (DME/DDE) |
| D39572 | Message (4 wheel drive torque) out of date, receiver: parking brake (EMF), transmitter: Engine (DME/DDE) |
| D39577 | Engine interface (DME/DDE) (4 wheel drive torque): Signal invalid |
| D3958C | Message (relative time, 328) absent, receiver: EMF, transmitter: Instrument cluster |
| D3958F | Signal (relative time, 0x328) undefined: Instrument cluster transmitter |
| D39590 | Interface instrument cluster (relative time, 328): Signal invalid |
| D39591 | Signal (relative time, 328) undefined: Transmitter instrument cluster |
| D395BC | No message (Dynamic Stability Control, 173), receiver: parking brake (EMF), transmitter: dynamic stability control (DSC) |
| D395BD | Checksum error (Dynamic Stability Control, 173), receiver: parking brake (EMF), transmitter: dynamic stability control (DSC) |
| D395BE | Message (Dynamic Stability Control, 173) out of date, receiver: parking brake (EMF), transmitter: dynamic stability control (DSC) |
| D39646 | Message (accelerator pedal angle, D9) absent, receiver: EMF, transmitter: Engine |
DEFINISSEZ VOTRE MARQUE POUR ACCEDER A VOS CODES DEFAUTS
LES PRODUITS DISPONIBLES POUR VOTRE AUTO
-
Revue technique RTA
Revue Technique Automobile
La revue technique de référence depuis 1946. La RTA est une revue papier pour tous publics, qui vous permet d'effectuer les petites et les grosses réparations
Voir le descriptif
-
Entretien courant MTA
Méthode Technique Automobile
La MTA est issue de nos outils destinés aux pros de l'auto. Ces méthodes en ligne permettent d'effectuer les opérations de maintenances de votre auto (filtres, courroies, etc.)
Voir le descriptif
-
Toutes réparations MTAx
Méthode Technique Automobile Expert
La MTA expert est un outil en ligne destiné aux experts en mécanique et en carrosserie, pour effectuer tous types de réparations sur une voiture.
Voir le descriptif