Que signifie votre code Code Défaut BMW ?
Grace au système OBD, les
Bmw
fabriqués après 1996 sont normalement équipés d'une prise diagnostique OBD.
Si l'ordinateur de la voiture rencontre un problème,un code d'erreur ou un code de diagnostic (DTC)
sera stocké dans la mémoire de l'ECU de la voiture.
Avec un lecteur OBD branché sur le port OBD (On-Board Diagnostics) de la voiture, vous pouvez lire la liste des codes stockés, et donc découvrir quel est le problème.
Les codes suivent une formule permettant de savoir généralement quel est le problème avant même de regarder le tableau ci-dessous.
Nous vous présentons ci-dessus une liste très complète des différents codes défauts possibles.
Si le code défaut de votre auto s'affiche au tableau de bord, vous n'aurez peut-être même pas besoin d'un lecteur OBD . il sera dans la liste .
Réparer le code défaut de votre auto, c'est potentiellement simple à faire avec vos revues et méthodes techniques.
Réparer le code défaut de votre auto, c’est potentiellement simple à faire avec nos revues et méthodes techniques
| Code | Libellé |
|---|---|
| E06C17 | Interface instrument cluster (Status drive dynamics display, 0x2C5) Signal invalid |
| E06C18 | Interface instrument cluster (relative time, 0x328): Signal invalid |
| E06C1B | Integrated chassis management (ICM) interface (Status Coordination steering wheel vibraion, 0x347) Signal invalid |
| E06C2A | Instrument cluster signal (units, 0x2F7): Signal invalid |
| E06C30 | Interface FEM (Rain sensor wiper speed, 0x226) Signal invalid |
| E06C32 | Interface DME/DDE (on-board power supply voltage, 0x281) Signal invalid |
| E06C37 | Signal (longitudinal acceleration, centre of gravity, 0x199) invalid, transmitter DSC / ICM |
| E06C38 | Interface HU (Navigation GPS 1, 0x34A) Signal invalid |
| E06C3B | Interface FEM (Status continuously variable High beam assistant, 0x96) Signal invalid |
| E06C3D | Interface DME/DDE (accelerator pedal angle, 0xD9) Signal invalid |
| E06C3E | Interface HU (I-Drive control FAS, 0x420) Signal invalid |
| E06C3F | Integrated chassis management (ICM) interface (Effective front axle steering angle, 0x302) Signal invalid |
| E06C41 | Interface instrument cluster (unit, 0x2F7) Signal invalid |
| E06C42 | HU interface (navigation graph map data 0x42C) signal invalid |
| E06C43 | Integrated chassis management (ICM) interface (Status Object coordination braking, 0x21F) Signal invalid |
| E07C00 | No message (vehicle yaw rate, 0x19F), receiver: Camera-based driver assistance systems (KAFAS), transmitter: integrated chassis management (ICM) |
| E07C01 | No message (vehicle speed, 0x1A1), receiver: Camera-based driver assistance systems (KAFAS), transmitter: integrated chassis management (ICM) |
| E07C02 | No message (driving dynamics display status, 0x2C5), receiver: Camera-based driver assistance systems (KAFAS), transmitter: instrument cluster |
| E07C03 | No message (steering column stalk switch operation, 0x1EE), receiver: Camera-based driver support system, transmitter: FEM, SZL |
| E07C04 | No message (wiper switch operation, 0x2A6), receiver: Camera-based driver support system, transmitter: FEM, SZL |
| E07C05 | No message (ambient temperature, 2CA), receiver: Camera-based driver assistance systems (KAFAS), transmitter: instrument cluster |
| E07C06 | No message (time/date, 0x2F8), receiver: Camera-based driver assistance systems (KAFAS), transmitter: instrument cluster |
| E07C07 | No message (actual driver steering angle, 0x301), receiver: Camera-based driver support system, transmitter: integrated chassis management (ICM), SZL |
| E07C08 | No message (kilometre reading/range, 0x330), receiver: Camera-based driver assistance systems (KAFAS), transmitter: instrument cluster |
| E07C10 | No message (status of high-beam headlight assistant, 0x36A), receiver: Camera-based driver support system, transmitter: FEM,footwell module (FRM) |
| E07C11 | No message (relative time, 0x328), receiver: Camera-based driver assistance systems (KAFAS), transmitter: instrument cluster |
| E07C14 | No message (synchronisation navigation graph, 0x27A), receiver: Camera-based driver assistance systems (KAFAS), transmitter: ZGM |
| E07C20 | No message (rain sensor, wiper speed, 0x226), receiver: Camera-based driver support system, transmitter: FEM, JBE |
| E07C21 | No message (terminals, 0x12F), receiver: Camera-based driver support system, transmitter: FEM, car access system (CAS) |
| E07C22 | No message (longitudinal acceleration, centre of gravity, 0x199), receiver: Camera-based driver assistance systems (KAFAS), transmitter: integrated chassis management (ICM) |
| E07C23 | No message (navigation, GPS 1, 0x34A), receiver: Camera-based driver assistance systems (KAFAS), transmitter: HU, ZGM |
| E07C27 | No message (status of reverse gear, 0x3B0), receiver: Camera-based driver support system, transmitter: FEM,footwell module (FRM) |
| E07C28 | No message (status of stepless high-beam headlight assistant, 0x96), receiver: Camera-based driver support system, transmitter: FEM |
| E07C2A | No message (accelerator pedal angle, 0xD9), receiver: Camera-based driver assistance systems (KAFAS), transmitter: Engine |
| E07C2B | No message (steering angle, front axle, effective, 0x302), receiver: Camera-based driver support system, transmitter: integrated chassis management (ICM) |
| E07C2C | No message (lateral acceleration, centre of gravity, 0x19A), receiver: Camera-based driver support system, transmitter: integrated chassis management (ICM) |
| E07C2D | No message (units, 0x2F7), camera-based driver assistance systems (KAFAS) receiver, Instrument cluster transmitter |
| E07C2E | No message (wiper status, 0x252), receiver: Camera-based driver assistance systems (KAFAS), transmitter: FEM, JBE |
| E0840A | Gear selector switch (GWS), PT-CAN: Communication fault |
| E08486 | A-CAN Control Modul Bus OFF |
| E09400 | Message (display drivetrain data, 0x3FD) absent, receiver: GWS (PT-CAN), transmitter: EGS (PT-CAN) |
| E09402 | Message (display drivetrain data, 0x3FD) out of date, receiver: GWS (PT-CAN), transmitter: EGS (PT-CAN) |
| E09404 | Message (display drivetrain data, 0x3FD) checksum error, receiver: GWS (PT-CAN), transmitter: EGS (PT-CAN) |
| E09408 | Message (terminal, 0x12F) absent, receiver: GWS (PT-CAN), transmitter: Car access system (CAS) (PT-CAN) |
| E0940A | Message (Dimming, 0x202) absent, receiver: GWS (PT-CAN), transmitter: footwell module (FRM) (PT-CAN) |
| E0940C | Message (LCD brightness control, 0x393) absent, receiver: GWS (PT-CAN), transmitter: instrument cluster (PT-CAN) |
| E0940E | Message (Vehicle speed, 0x1A1) absent, receiver: GWS (PT-CAN), transmitter: integrated chassis management (ICM) (PT-CAN) |
| E09410 | Message (display drivetrain data, 0x3FD) absent, receiver: GWS (PT-CAN2), transmitter: EGS (PT-CAN2) |
| E09412 | Message (display drivetrain data, 0x3FD) out of date, receiver: GWS (PT-CAN2), transmitter: EGS (PT-CAN2) |
| E09414 | Message (display drivetrain data, 0x3FD) checksum error, receiver: GWS (PT-CAN2), transmitter: EGS (PT-CAN2) |
| E09418 | Message (terminal, 0x12F) absent, receiver: GWS (PT-CAN2), transmitter: Car access system (CAS) (PT-CAN2) |
| E09420 | Message (Relative time, 0x328) absent, receiver: GWS (PT-CAN), transmitter: instrument cluster (PT-CAN) |
| E09424 | Message (powertrain data 2, 0x3F9) absent, receiver: GWS (PT-CAN), transmitter: (DME) |
| E09425 | Message (data, drive train 2, 0x3F9) not current, receiver GWS, transmitter EDME |
| E09426 | Message (data, drive train 2, 0x3F9) checksum error, receiver GWS, transmitter EDME |
| E0AC00 | Interface EGS (data display transmission, 0x3FD): Signal invalid |
| E0AC04 | Interface car access system (CAS), PT-CAN (terminals, 0x12F): Signal invalid |
| E0AC06 | Interface footwell module (FRM) (dimming): Signal invalid |
| E0AC20 | Interface EGS, PT-CAN2 (data, display, transmission train, 0x3FD): Signal invalid |
| E0AC24 | Interface car access system (CAS), PT-CAN2 (terminals, 0x12F): Signal invalid |
| E0AC25 | Signal (drive train data 2, 0x3F9) invalid, transmitter EDME |
| E0C40B | High Beam Assist (FLA), K-CAN: Wiring/electrical failure |
| E0C414 | High Beam Assist (FLA), K-CAN: Communication fault |
| E0C468 | High Beam Assist (FLA), BODY-CAN: Communication failure |
| E0D400 | Message missing (vehicle yaw rate, 0x19F), camera-based driver support systems (KAFAS) receiver, ICM transmitter |
| E0D401 | Message missing (speed vehicle, 0x1A1), camera-based driver assistance systems (KAFAS) receiver, ICM transmitter |
| E0D402 | Message missing (driving dynamics display status, 0x2C5), camera-based driver assistance systems (KAFAS) receiver, Instrument cluster transmitter |
| E0D405 | Message missing (wiper switch operation, 0x2A6), camera-based driver assistance systems (KAFAS) receiver, steering column switch cluster transmitter |
| E0D406 | Message missing (ambient temperature,0x2CA), camera-based driver assistance systems (KAFAS) receiver, Instrument cluster transmitter |
| E0D407 | Message missing (time/date display,0x2F8), camera-based driver assistance systems (KAFAS) receiver, Instrument cluster transmitter |
| E0D40A | Message missing (kilometre reading/range, 0x330), camera-based driver assistance systems (KAFAS) receiver, Instrument cluster transmitter |
| E0D40B | Message missing (rain sensor wiper speed, 0x226), FLA receiver, FEM transmitter |
| E0D40C | Message missing (GPS navigation 2, 0x34C), camera-based driver assistance systems (KAFAS) receiver, central gateway module transmitter |
| E0D40D | Message missing (navigation system information, 0x34E), camera-based driver assistance systems (KAFAS) receiver, central gateway module transmitter |
| E0D412 | Message missing (DSC stabilisation status, 0x173), camera-based driver assistance systems (KAFAS) receiver, DSC transmitter |
| E0D414 | No message (units, 0x2F7), camera-based driver assistance systems (KAFAS) receiver, Instrument cluster transmitter |
| E0D415 | Message missing (relative time, 0x328), camera-based driver assistance systems (KAFAS) receiver, Instrument cluster transmitter |
| E0D417 | Message missing (navigation graph concordance, 0x348), camera-based driver assistance systems (KAFAS) receiver, central gateway module transmitter |
| E0D418 | Message missing (navigation graph synchronisation, 0x27A), camera-based driver assistance systems (KAFAS) receiver, central gateway module transmitter |
| E0EC03 | Integrated chassis management (ICM) interface (Vehicle speed, 0x1A1)Signal invalid |
| E0EC04 | Integrated chassis management (ICM) interface (vehicle speed, 0x1A1): Signal invalid |
| E0EC05 | Signal (vehicle yaw rate, 0x19F) invalid, transmitter ICM/DSC |
| E0EC07 | Instrument cluster interface (Milage/distance to empty, 0x330) signal invalid |
| E0EC0C | Interface instrument cluster (Time second counter relative, 0x328) Signal invalid |
| E0EC0D | FEM interface (high-beam headlight assistant display, 0x36A) signal invalid |
| E0EC0E | Inderface FEM (Status continuously variable High beam assistant, 0x96) Signal invalid |
| E0EC0F | Instrument cluster interface (ambient temperature, 0x2CA) signal invalid |
| E1040A | Instrument cluster, PT-CAN: Communication fault (Bus-Off) |
| E10445 | Instrument cluster: MOST Reset |
| E1045F | CAN bus off |
| E11401 | Message (night vision status, 0x21F) absent, receiver: instrument cluster, transmitter: night vision electronics (NVE) |
| E1140A | CAN AUDIO message missing (Anzeige_Audio_Menü_Links) |
| E1140C | CAN AUDIO Display audio menu, right: Timeout |
| E1140E | CAN AUDIO Display audio row A, left: Timeout |
| E11410 | Message (relative time, 0x328) absent, transmitter: Instrument cluster through central gateway |
| E11411 | Message (relative time, 0x328) absent, transmitter: instrument cluster |
| E11412 | CAN AUDIO Display audio row B, left: Timeout |
| E11414 | CAN AUDIO Display audio row B, right: Timeout |
| E11416 | CAN AUDIO Display audio row C, left: Timeout |
| E11418 | CAN AUDIO Display audio row C, right: Timeout |
DEFINISSEZ VOTRE MARQUE POUR ACCEDER A VOS CODES DEFAUTS
LES PRODUITS DISPONIBLES POUR VOTRE AUTO
-
Revue technique RTA
Revue Technique Automobile
La revue technique de référence depuis 1946. La RTA est une revue papier pour tous publics, qui vous permet d'effectuer les petites et les grosses réparations
Voir le descriptif
-
Entretien courant MTA
Méthode Technique Automobile
La MTA est issue de nos outils destinés aux pros de l'auto. Ces méthodes en ligne permettent d'effectuer les opérations de maintenances de votre auto (filtres, courroies, etc.)
Voir le descriptif
-
Toutes réparations MTAx
Méthode Technique Automobile Expert
La MTA expert est un outil en ligne destiné aux experts en mécanique et en carrosserie, pour effectuer tous types de réparations sur une voiture.
Voir le descriptif